598217
3
Zoom out
Zoom in
Previous page
1/19
Next page
M
X670 / MX675 21
T
hank you for purchasing this MX670 or MX675 series
multimeter clamp.
To obtain the best service from your unit:
read these operating instructions carefully,
comply with the precautions for use.
1 GENERAL INSTRUCTIONS
If the device is used in a manner unspecified in these
instructions, the protection provided by the device may be
compromised.
1.1 Unpacking – Packing
All instruments are checked mechanically
and electronically
before shipment. All precautions are taken to be sure you
receive an undamaged instrument. If there is damage, notify
the carrier immediately.
1.2 Precautions and safety in measurements
1.2.1 Before any use
The MX670 & MX675 are dual display multimeter clamps.
These multimeter clamps are compliant with electrical
standard IEC 61010 concerning measuring instruments. For
your own safety and to prevent any damage to your measuring
instrument, you must follow the instructions in this manual.
This instrument can be used for measurement on
category IV electrical installations, in a degree 2 pollution
environment, indoors at an altitude lower than 2000 m
and with a voltage in relation to ground lower than or
equal to 600 V.
* Definition of installation categories
(see IEC 61010-1):
CAT I
: Circuits not directly connected to network and
specially protected
Example: protected electronic circuits
CAT II: Circuits connected directly to low-voltage
installation
Example: power supply for domestic electrical appliances
and portable tools
CAT III: Power supply circuits in the building installation
Example: Electrical panel, circuit breakers, fixed industrial
machines or devices
CAT IV: Source circuits of building low-voltage
installation.
Example: Power feeders, counters and protection
systems
For safety reasons, you must use only measuring leads, of
voltage and category at least equal to those
of the
instrument
and compliant with standard IEC 61010.
Before use, always
check the integrity
of the
instrument casing
and cable insulation.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metrix MX 675 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metrix MX 675 in the language / languages: English as an attachment in your email.

The manual is 0,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Metrix MX 675

Metrix MX 675 User Manual - German - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info