625668
12
Zoom out
Zoom in
Previous page
1/84
Next page
12
ENGLISH
ENG
Keep children away from the battery charger and
the working area! Keep your battery charger out of
reach of children!
Children should be supervised to ensure that they
do not play with the tool.
Pull out the mains plug immediately if the battery
charger starts to smoke or flames emerge!
See page 3 (please unfold).
PowerTrimmer...:
1Enclosure
2 Cutting blades
3Handle
4 Battery pack release
5 Battery pack
6Trigger switch
7 Switch lock (against accidental activation)
8 Hand protection
Battery charger LC 60:
9C
harging compartment
10 W
arning display
11 O
peration display
Battery charger LC 60:
Automatic balancing of the individual battery
cells permits optimum utilisation of the available
capacity and, at the same time, lengthens the
service life of the battery pack.
PowerTrimmer...:
Check Quick stop:
Switch machine on briefly and then off again. Have
the machine repaired if braking time is clearly
lengthened.
Charge the battery pack before use (5).
Battery charger LC 60:
Before plugging in, check to see that the
rated mains voltage and mains frequency, as
specified on the rating label, match your power
supply.
Self-test
Insert the mains plug. The warning display (10) and
the operating display (11) light up in succession for
approx. 1 second.
8.1 Battery pack
Removing battery pack:
Press the battery pack release (4) and remove
the battery pack (5).
Inserting battery pack:
Push in battery pack (5) until it engages.
8.2 Switching On and Off
Switching on
(safety operation):
Push the switch lock (7) in the direction of the
arrow and press the trigger switch (6).
To switch off:
Release the actuated trigger switch (6).
Thanks to the patented Quick stop, the cutting
blades come to a standstill within approx. 0.3
seconds.
Have the machine repaired if braking time is
clearly lengthened.
The noise that sometimes occurs during a
machine Quick stop is design-related and has no
influence on operation and service life.
8.3 Cleaning the cutting blades
(after every use)
Before cleaning:
Switch the machine off. Remove battery
pack (5) from machine.
Wear protective gloves.
Remove contamination, remains of blades etc.
(e.g. with a brush or cloth)
After cleaning:
Treat cutting blades with Metabo
machine care oil 6.30474 or Pump Spray 6.30475
(biologically degradable).
The maximum number of charge cycles can only
reached if an exhaustive discharge of the battery
pack is avoided. If performance diminishes,
recharge the battery pack.
9.1 Charging battery pack
Insert battery pack (5) up to stop in charging
compartment (9).
The operating display (11) flashes and the battery
is charged.
5Overview
6 Special Product Features
7 Commissioning
8 Use of PowerTrimmer...
9 Use of battery charger
17026967_0310 PowerTrimmer.book Seite 12 Donnerstag, 11. März 2010 1:15 13
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metabo PowerTrimmer at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metabo PowerTrimmer in the language / languages: All languages as an attachment in your email.

The manual is 6,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info