600779

Metabo HHS 55 Manual

8
Zoom out
Zoom in
Previous page
1/52
Next page
ENGLISHen
8
hedge) and the stoppage cannot be corrected by
pulling the hedge trimmer back, the motor must first
be switched off and the plug removed from the
socket before the cause of the blockage can be
removed manually from the cutting blade.
For other activities (e.g. remo
ving twigs or cuttings),
deposit the machine outside the working area.
Lay the machine down such that persons are not at
r
isk.
When you have laid the hedge trimmer down, pull
the
plug from the socket.
For storage and transportation, always slide the
en
closure onto the cutting blades. (It has been slid
on correctly if the Metabo lettering faces upwards).
Only carry the machine by the bow-type handle.
5. Overview
See page 2.
1 Switch (safety two-hand operation)
2 Switch (safety two-hand operation)
3 Bow-type handle
4Hand protection
5Enclosure
6 Cutting blades
7 Impact protection with twig
feed
8 Cable strain relief device
* depending on model
6. Commissioning
Before plugging in, check to see that the
rated mains voltage and mains frequency,
a
s stated on the rating label, match with your
power supply.
To prevent the hedge trimmer plug
from
inadvertently being pulled out of the coupling socket
of the extension cable, attached the extension
cable to the cable strain relief device as shown (8)
(Figure on page 2).
Note: the cable tension device is designed to hold
approved extensi
on cables (H07 RN-F 3G1,5 /
3G1,0) that are used most frequently for external
applications.
Check Quick stop:
Switch machine on briefly and then off ag
ain. Have
the machine repaired if braking time is clearly
lengthened.
7. Use
7.1 Switching On and Off
Switching on (
safety two-hand operation):
• For normal applications: Press switch (1) an
d
switch (2).
To switch off:
Release one of the two actuated
switches.
Thanks to the patented Quick
stop, the cutting
blades come to a standstill within 0.05 seconds.
Have the machine repaired if braking time is
clearly lengthened.
The noise that sometimes o
ccurs during a machine
Quick stop is design-related and has no influence
on operation and service life.
7.2 Cleaning the cutting blade
(after every use)
Before cleaning:
Switch the machine off.
Pull the mains plug out of the socket.
Wear protective gloves.
Remove contamination, remains
of blades etc. (e.g.
with a brush or cloth)
After cleaning: Treat cutting bla
de with Metabo
hedge trimmer care oil 6.30474 or Pump Spray
6.30475 (biologically degradable).
8. Maintenance
It is advisable to have blunt cutting blades
sharpened in a specialist workshop. Check cutting
blades regularly for damage and have them
repaired in a specialist workshop immediately if
necessary.
f
9. Accessories
Use only genuine Metabo accessories.
For a complete range of accessories, see
ww
w.metabo.com or the main catalogue.
10. Repairs
Repairs to electrical tools must be carried out by
qualified electricians ONLY!
Contact your local Metabo represen
tative if you
have Metabo power tools requiring repairs. For
addresses see www.metabo.com.
You can download a list of spare parts from
ww
w.metabo.com.
When replacing the carbon brushes, for safety
reasons the safety device (spare parts list,
Pos
. 26) must also be replaced.
11. Environmental Protection
Observe national regulations on environmentally
compatible disposal and on the recycling of disused
machines, packaging and accessories.
Only for EU countries: Never dispose of
power tools in your househ
old waste! In
accordance with European Guideline
2002/96/EC on used electroni
c and electric
equipment and its implementation in
national
legal systems, used power tools must be collected
se
parately and handed in for environmentally
compatible recycling.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metabo HHS 55 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metabo HHS 55 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info