451404
3
Zoom out
Zoom in
Previous page
1/56
Next page
3 Technische Daten
BKH 400/3,1 WNB BKH 450/5,5 DNB
Tischgröße 1000x660 mm 1000x660 mm
Gesamthöhe 850 mm 850 mm
Schnitthöhe 127 mm 140 mm
Motordrehzahl 2800 min
-1
2800 min
-1
Schnittgeschwindigkeit 58,5 m/s 66 m/s
Höhenverstellung 0-127 mm 20 - 140 mm
Motorleistung 3100 W 5500 W
Betriebsspannung 1~230 V 3~400 V
Netzfrequenz 50 Hz 50 Hz
Absicherung 1x16 A 3x16 A
Arbeitsbezogener Emissionswert nach
DIN 45635
Leerlauf 83,8 dB(A) 88,9 dB(A)
Betrieb 91,3 dB(A) 92,9 dB(A)
Schalleistungspegel
Leerlauf 94,7 98,1
Betrieb 99,0 101,1
Gewicht 90 kg 90 kg
Bestell-Nr 010 400 3109 010 450 5503
Nur die Geräte mit Bremsmotoren entsprechen den GS-Vorschriften der Berufsgenossenschaft Holz.
4 Lieferumfang
Kreissägeblatt 400x2,2 bzw. 450 x 2,5, Chromstahl
Spaltkeil DIN 38820 Gr. 50x3
Schutzhaube
Parallelanschlag
Winkelanschlag
Kranösen
Schiebestock
Werkzeug für Sägeblatt- und Spaltkeilbefestigung
Betriebsanleitung
- Bei den Sägen mit 230 V Wechselstrom braucht keine
Drehrichtungsprüfung bzw. -änderung vorgenommen
werden.
- Bei den Sägen mit 400 V Drehstrom muß die Dreh-
richtung durch kurzzeitiges Einschalten (max. 2 Sek.)
geprüft werden. Zur Drehrichtungs- änderung
können die beiden Anschlußstifte im Schalter von
Außen gedreht werden. Dazu den Strom-stecker ab-
ziehen und mit einem 6 mm Schraubendreher die
beiden Stifte im Schalter eindrücken und drehen.
- Gegen unbefugtes Benutzen kann der Schalter mit
einem Vorhängeschloß gesichert werden.
6.3 Drehrichtungsänderung des Sägeblattes
6.2 Netzspannung
-
Zum Netzanschluß benötigt man für den Typ BKH 400/3,1 einen dreiadrigen Kabalanschluß mit Schukosteckdose nach
VDE 0100.
- Für die Type BKH 450/5,5 benötigt man einen fünfadrigen Kabelanschluß mit CEE-Steckvorrichtung 16 A nach VDE 0100.
- Als Verlängerungskabel bzw. Anschlußkabel dürfen nur Gummikabel H 07 RN-F 3x1,5 bzw. 5x1,5 verwendet werden.
- Die Steckdose, an welche die Maschine angeschlossen wird, muß den VDE-Bestimmungen 0100 ent-sprechen.
- Bei Baustellenbetrieb muß die VDE-Vorschrift 0100 Teil 704 beachtet werden.
6 Inbetriebnahme
6.1 Aufstellung -
Die Maschine muß auf ebenem und standfestem Boden aufgestellt werden. Der Arbeitsplatz muß stolperfrei hergerichtet
werden.
5 Montage
Aus Transportgründen ist die Schutzhaube unter dem Tisch befestigt und muß noch montiert werden.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Metabo BKH 450 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Metabo BKH 450 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 6,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info