609959
49
Zoom out
Zoom in
Previous page
1/52
Next page
47
- 一系列的附件可以安装在设备的连接管道上。
- 过滤前盖作为吸入清水的吸水口的保护装置是足够的。
- 为了防止喷泉喷嘴堵塞,使用过滤棉和过滤篮(在MP水泵的供货范围内)将是必要的。
- 提示:用于防止喷泉喷嘴堵塞的过滤棉和过滤篮同样也作为附件168/009074在销售范围内。
陆地安装(见图3+4)
水泵也可用于在陆地安装或者干式安装的应用。
- 将设备放置在低于液面,且在池塘的旁边的位置以至于水可以流入水泵(不是自吸)。
- 移去过滤前盖(1)(见图5)。
- 连接软管到设备上,连接的管道必须是防水的。
- 在启动设备前,让设备里面和管道已经灌满水。
- 提示:为了防止设备堵塞,在装吸入管道时,可以提供预过滤装置168/009051(也在附件销售范围内)。
过载保护
内置的过载保护装置可以阻止设备过热,这样设备就必须冷却下来。
当冷却以后,设备又会自动启动。
检查一下如下几种的设备的工作情况:
- 是否有一个充足的水源供给?
- 过滤外壳是否堵塞?
- 是否有脏东西进入了中座(遵循清洗说明书的步骤)?
- 软管或者喷头是否堵塞。
- 水泵是否已经冷却?
一旦你已经解决了问题,你可以又重新启动设备了
拆装步骤(见图5-7)
1.遵循安全说明,断开设备的电源!
2.摁下设备顶部的卡口,卸下预过滤前盖(1)。
3.用螺丝刀拧下中座上的4颗螺丝钉(9)。
4.取下中座(4)上的固定环(6)。
5.从中座(4)中取出转子组件(8),注意中座(4)上的O型圈(7)。
6.用清水和软棉球清洗所有的部件。
7.装配:
- 将O型圈(7)压在中座(4)的槽里。
- 将转子组件(8)放进金属套筒中,同时注意将轴承定位环上的两个孔对准中座上的两个小凸台。
- 确定转子组件是完全自由且可旋转的。
- 检查一下O型圈(7)在固定环上的位置。
- 装上固定环(6)并将4颗螺钉(9)拧在中座(4)上。
- 装上过滤篮(10)和过滤棉(11)(MP系列的才有)。
- 将过滤前盖(1)装在中座(4)上。
维护
为了延长设备的使用寿命并让它在一个好的状态下运行,建议按照如下的清洗和维护方法
每个人都可以方便快捷的做这些简单的操作。请见“拆装步骤”
维护方法
- 开始阶段每天检查一下水泵的运行状况,如果必要清洗过滤外壳
- 维护的周期(完全清洗)将取决于池塘的污染程度,重复周期性的维护将依照要求来执行
 如果您确定有零部件损坏或者磨损,建议跟换它。详见“备件”
重要:如果池水为含钙的水质,转子组件(8)和中座(4)里面的不锈钢的金属套筒
必须周期性的清洗。
过冬/存放
防止您的设备被霜冻!
秋天的时候请将设备从池塘中拿出
请按照说明书清洗设备。在冬天的时候,将设备放入一个盛满水的容器,防止陶瓷轴承变干
将该容器放在一个防霜冻的房间里面。
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Messner MP 35000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Messner MP 35000 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info