725519
4
Zoom out
Zoom in
Previous page
1/54
Next page
16. Do not block the outlet grille and rear grill .
17. After finished using, release the water from the water tank.
18. If the device is not used for long periods of time, unplug it from the network.
19. Do not move the device when the water tank is filled with water.
20. Do not place any objects on the device.
21. The devices can be used only with efficiently working ventilation.
DEVICE DESCRIPTION (fig. A)
1. Handle 2. Control panel
3. Wheels 4. Mesh filter
5. Water tank 6. 2 ice containers
7. Water level indicator 8. Mesh filter frame
USING THE APPLIANCE
A noticeable reduction in the temperature of the outlet air occurs after putting into the water tank 2 plastic containers attached to the
product, previously filled with water and frozen in the freezer. It is recommended to fill the tank with cold tap water.
1. After unpacking the device from the packaging, mount the wheels and set the air cooler on a dry, flat surface, then connect the power
plug.
2. Slide out the water tank (5) on the back of the appliance and pour in the water. Be careful not to exceed the maximum level.
3. Turn on the device with the "LOW", "MID" or "HIGH" button on the control panel, thus determining the airflow rate:
"LOW" - slow fan speed
"MID" - medium fan speed
"HIGH" - fast fan speed
4. The "SWING" button causes oscillation of vertical blinds, which ensure even distribution of cooled air streams. The horizontal blinds
do not move automatically - you can move them manually.
5. The "COOL" button reduces the temperature of the exhaust air by activating the water pump. Two ice containers (6) are included in
the set. To use ice containers placed them in the freezer for about a day first. Then insert one or both of them into the water tank (5)
without exceeding the maximum level marked on the water tank. The "COOL" function also moisturizes the air.
6. During operation of the device, periodically check the water level for refilling the tank. Do not activate the "COOL" function if the water
level is lower than the minimum level.
7. To end the operation of the device, press the "OFF" button on the control panel.
CLEANING AND MAINTENANCE
1. It is recommended to clean the device with a soft, dry cloth. Do not use any chemical solvents as they may permanently damage or
deform the surface.
2. After a long time of use, the mesh filter (4) and mesh filter’s frame (8) will be clogged with dust, which will significantly affect the
cooling efficiency of the device. If the water does not change for a long time, mold may occur. We recommend cleaning the mesh filter
(4) and mesh filter’s frame (8) once every two weeks. The cleaning procedure is as follows:
a) Disconnect the device from the power supply, remove the screw on the back cover, then remove the frame and filter.
b) Wash the filter in a mild solution of detergent and warm water, then rinse with clean water.
c) Wash the mesh filter under running clean water. Use a soft brush for cleaning.
3. Pour out water from the tank before storage. Then dry the device, mesh filter, mesh filter’s frame and housing to avoid moisture
damage.
TECHNICAL DATA
Supply voltage: 220-240 V ~ 50/60 Hz
Power: 75W
Maximum power: 350W
Capacity: 4L
Water consumption: 0.7-0.8 liters / hour
ALLGEMEINE SICHERHEITSVORSCHRIFTEN
LESEN SIE AUFMERKSAM WICHTIGE ANWEISUNGEN BEZÜGLICH DER SICHERHEIT
DER BENUTZUNG BEWAHREN SIE DIESE FÜR DIE ZUKUNFT AUF
Bei Verwendung des Gerätes zu gewerblichen Zwecken werden die Garantiebedingungen
geändert.
1. Vor dem ersten Gebrauch, die Bedienungsanleitung lesen und die dort angegebenen
To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding waste
bins. Used appliance should be delivered to the dedicated collecting points due to hazarsous components, which may
effect the environment. Do not dispose this appliance in the common waste bin.
DEUTSCH
Device is made in class I of insulation.
Device is compliant with EU directives:
Low voltage directive (LVD)
Electromagnetic compatibility (EMC)
Device marked CE mark on rating label
4
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mesko MS 7914 - Aircooler at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mesko MS 7914 - Aircooler in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 2,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info