669487
1
Zoom out
Zoom in
Previous page
1/2
Next page
2
1
3
1
Power supply 230 V AC +10%, -15%,
50/60 Hz
2
Leaet holder slot
3
Sealed swivel cover
4
Output contact
5
Brightness sensor
6
ON override external command input
7
Back-lit LCD screen
8 9
10
Date; Time; Day 1 = Monday,
Day 2 = Tuesday, etc.
11
Output contact status (On, Off)
12
Viewing ON periods by 1
h
segment
13
Operating mode: "AUTO", "PROG":
programming, "
": time resetting,
"MAN": "HOLIDAY" programming, "
":
adapt conguration
The IC2000P+ controls lighting according to brightness AND the time of the day.
IF brightness is less than the set threshold (light sensitive function: IC)
AND IF the time program allows relay closing (time function: IH),
THEN the lighting circuit is activated.
14
Operation indication " " ON override,
"
" holidays
15
Programming help and status
pictogram: "
" lighting,
"
" switch-off, " " programmed
switch-off,
16
"AM" morning, "PM" afternoon,
"s" seconds, "lx" lux, "min" minutes
17
"Menu" Selection of operating modes
18
"-", "+" Value setting and navigation
keys
19
"ok" Flashing information validation
key.
To reset, press simultaneously on the
3 keys "-", "menu" and "ok", i.e.
17
,
18
(-) and
19
.
The pictograms " ", " " ash during the time
delay phase (switch-on and switch-off).
IH function
Brightness
Threshold
IC function
IC2000P+
output
Status picto.
displayed
15
IC2000P+
output
Status picto.
displayed
15
On energisation or after having reset (see the New Features chapter):
b Select the language (FRANÇAIS, ENGLISH, etc.)
b Set the year, month, day and time
b Choose between three pre-set time programs in your IC2000P+:
v "DAYPROG": ON time programming from 7
h
to 20
h
V validation of the IC function
from 7
h
to 20
h
v "NIGHTPROG": ON time programming from 5
h
to 8
h
and from 18
h
to 23
h
V
validation of the IC function on these two operating periods
v "EMPTYPROG": OFF time programming the entire day V no validation of the IC
function.
These programs can be modied by going to the program menu when the
conguration phase is nished (modication of times, operating periods, etc.)
b Set your brightness threshold using the "+" and "-" keys, either starting from the
previously entered value, or from the measured value (2 lux if there is no mains
supply or sensor).
The following information can be read on the display:
The position of the threshold in the range (bargraph)
The brightness range (350-2100)
Brightness above the threshold " ", below the threshold " "
The threshold value (1400 lux)
b Validate your choice by pressing "ok".
Once this phase is over, your IC2000P+ moves to the "AUTO" mode and
operates with the items dened above (time program and threshold).
If you do not agree with the ashing word or value: scroll down the display
using the "-" and "+" keys.
To conrm the ashing word or value: validate using "ok".
If you are lost: press "Menu" to return to the "AUTO" mode without saving the last
change.
If you press no key for 2 minutes: return is automatic to the "AUTO" mode
without saving.
External input (ON override
6
)
4
Access the "PROG" mode by pressing the "Menu" key; the "PROG" mode is used to manage the IH time programs of your IC2000P+,
by means of ve options:
b "NEW" to dene a new program (if the "EMPTYPROG" program has been chosen in the "Congure" phase), or add ACTIVE, INACTIVE
commands to the two other pre-set time programs: "DAYPROG" and "NIGHTPROG":
v "SAVE": to save the new switching operation
v "COPY": to repeat this switching operation for the other days of the week
b "CHECK" to view the programs
b "MODIFY" to change the program already memorised
b "CLEAR" to delete the program partially or totally (the date, time and language are kept):
v "SINGLE" deletes programming of the chosen switching operations
v "ALL OFF" deletes the programming of all the days of the week
b "FINISH" to leave the "PROG" mode and return to the "AUTO" mode.
Congure
New features
Cable
en
IC2000P+: 15483
Programmable Light
Sensitive Switch
(2-2100 lux)
and wall-mounted cell
Program "PROG"
ON
OFF
24 6
24 6
100 m maxi 100 m maxi
ON override
external contact
(option)
max. Ø 4
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Merlin Gerin IC2000P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Merlin Gerin IC2000P in the language / languages: English as an attachment in your email.

The manual is 0,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Merlin Gerin IC2000P

Merlin Gerin IC2000P User Manual - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info