494814
2
Zoom out
Zoom in
Previous page
1/6
Next page
To programme the
F A C I L E L i g h t remote control,
follow the indications in paragraph
A
,
B
or
C
.
1. Switch on the TV.
2. Look for the brand of your TV in the code book and make
a note of the code indicated alongside (
e.g. PHILIPS 0025
)
or the code for the brand indicated by the arrow.
3. Hold down the MUTE and ON/OFF buttons together for
5 seconds until the light indicator at the top starts to flash
indicating that the remote control is being programmed.
4. Release the buttons and enter the brand code previously
identified (
e.g. 0025
) within 12 seconds. The light indicator
flashes more quickly to indicate that the remote control
is ready for the search.
5. Point the remote control at the TV. Press and slowly release
the ON/OFF key several times, stopping when the TV
goes off.
6. When the TV goes off, press the OK key to confirm. Three
flashes indicate that the operation has been completed
correctly.
The quickest and easiest way to programme the remote control
is by consulting the website www.gumbodylight.com.
BRAND SEARCH PROGRAMMING MODE
A
PHILIPS 0025
PHONOLA
PHILIPS
+++
FITTING THE BATTERIES
Before programming and using
the remote control, fit the batteries.
The remote control requires 2 new
AA/LR06
batteries. Insert the batteries as shown:
• Remember to replace the batteries once a year.
• If the light indicator starts to flash while using the remote
control, replace the batteries. The batteries are low.
When you remove the batteries, fit the new ones within
5 minutes or you may have to reprogramme your remote
control.
• Make a note of the code for your TV on the adhesive label
inside the battery cover in case you have to reprogramme
your remote control.
+
5 SEC.
ADDITIONAL CHECK
Check that some of the other keys, corresponding to those on your original remote control, work correctly.
If the commands function incorrectly or erratically, you have probably entered a code for a similar remote
control but not the right one. In this case, repeat the search procedure starting from
point 3
, entering the
code previously used (e.g. 0025).
8
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Meliconi Gumbody Facile light at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Meliconi Gumbody Facile light in the language / languages: English as an attachment in your email.

The manual is 0,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info