494816
4
Zoom out
Zoom in
Previous page
1/5
Next page
1. Hold down the MUTE and ON/OFF keys together for 5
seconds until the light indicator starts to flash.
1. Release the keys and enter the code (
e.g: TV 1100
). Three
flashes indicate that the operation has been completed
correctly.
CURRENT CODE DISPLAY
To find out the code of your remote control, follow this procedure:
1. Hold down the MUTE and ON/OFF keys together for 5
seconds until the light indicator starts to flash.
2. Release the MUTE and ON/OFF keys and press and
release the 1-/-- key within 8 seconds.
3. After a few seconds, the light indicator communicates
the code you are looking for by flashing the four numbers
separately. Count the number of flashes; each series of
flashes corresponds to one figure in the code. 10 flashes
correspond to 0.
4. Make a note of the code on the adhesive label inside the
battery cover for quick and easy future reprogramming.
.
........................................................ = 1
............................................ = 3
= 0
.......................... = 6
Code obtained = 1306
N.B. this operation cannot be interrupted and the remote control
cannot therefore be used until the end of the 4 series of flashes.
+
5 SEC.
4
If you know the exact code with which to programme the remote control, enter it as follows:
ENTERING THE CODE
+++
11
HOW TO USE THE ADDITIONAL COMMANDS WHICH DO NOT APPEAR ON THE KEYPAD
Find them on your
FACILE 100
remote control by pressing the keys one by one and discovering the commands
that interest you..
In particular, the additional functions most frequently used, such as NORMALIZATION, COLOUR and BRIGHTNESS,
can be found on the following keys:
Although not indicated on the keypad,
some keys can be used for additional commands.
For the functions used less frequently, look for the additional commands on the site
www.meliconi.com/guide. As well as easily finding the code to programme your remote control,
consult the on-line guide to help you to find which keys on the
FACILE 100
remote control correspond
to the additional commands.
Normalization:
Brightness (+): or green
Brightness (-): or red
Colour (+): or blue
Colour (-): or yellow
+
5 SEC.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Meliconi Gumbody FACILE 100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Meliconi Gumbody FACILE 100 in the language / languages: English as an attachment in your email.

The manual is 0,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info