494810

Meliconi Gumbody Facile 1 Manual

4
Zoom out
Zoom in
Previous page
1/5
Next page
9
INTERNET UPDATE
Today you can download from the internet directly to your remote control the codes of the latest devices or those
which will be brought out in future, codes which would not otherwise be available using traditional programming
methods. To do this you need to purchase the special MELICONI Audiocable, which allows you to download
the information you need onto any PC using an internet connection. Then go to the www.meliconi.com/guide
website and follow the on-screen instructions.
ENTERING THE CODE DIRECTLY
(only to be performed if you know the specifi c code to be set)
If they do not appear, repeat the procedure. If the result is still negative, it means the code indicated
is not included in the remote control. So you need to load it via INTERNET.
(see following section)
1. Press and hold down the ON / OFF and MUTE buttons
simultaneously for 6 seconds.
2. Release the buttons. The indicator light fl ashes.
Immediately enter the specifi c code found previously.
(e.g. 1306)
3. Three long fl ashes indicate a correct setting.
1
,
.
;
@
3
d
e
f
0
6
m
n
o
6 SEC.
and
DISPLAY CODE IN USE
If you set up the remote control using the MANUAL
SEARCH procedure, obtain and make a note of the code
in use as follows:
1. Press and hold down the ON / OFF and MUTE buttons
simultaneously for 6 seconds.
2. Release the button. The indicator light will fl ash. Press
the TV / RADIO button for an instant.
3. After a pause of several seconds, the indicator light
produces four sets of fl ashes, spaced out, corresponding
to the code to be obtained. Count the number of fl ashes.
Each set of fl ashes corresponds to one fi gure in the code.
Ten fl ashes correspond to the fi gure 0.
4. Make a note of the code obtained on the label on the
inside of the battery cover. You may need it in future.
Code obtained = 1306
6 SEC.
and
4


Need help? Post your question in this forum.

Forumrules
1

Forum

meliconi-gumbody-facile-1

Reset search

  • On my tv is coming up question do you want to switch off the tv (during installation ) what to do? Submitted on 1-10-2021 at 20:42

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Meliconi Gumbody Facile 1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Meliconi Gumbody Facile 1 in the language / languages: English as an attachment in your email.

The manual is 0,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info