494806

Meliconi Gumbody DIGITAL 2 SMART Manual

4
Zoom out
Zoom in
Previous page
1/5
Next page
PROGRAMMING BY INSERTING THE APPLIANCE CODE
N.B. this operation cannot be interrupted and the remote control cannot therefore be used
until the end of the 4 series of flashes.
CURRENT CODE DISPLAY
To find out the code of your remote control, follow this procedure:
If, when consulting the on-line guide at www.meliconi.com/guide, you find the exact code for the appliance
to program the remote control, insert the code as follows:
HOW TO USE THE ADDITIONAL COMMANDS WHICH DO NOT APPEAR ON THE KEYPAD
Find them on your
DIGITAL 2 SMART
remote control by pressing the keys one by one and discovering the
commands that interest you.
In particular, the additional functions most frequently used, such as NORMALIZATION, COLOUR and BRIGHTNESS,
can be found on the following keys:
Although not indicated on the keypad,
some keys can be used for additional commands.
For the functions used less frequently, look for the additional commands on the site
www.meliconi.com/guide. As well as easily finding the code to programme your remote control,
consult the on-line guide to help you to find which keys on the
DIGITAL 2 SMART
.remote control
correspond to the additional commands.
Normalization:
Brightness (+): or green
Brightness (-): or red
Colour (+): or blue
Colour (-): or yellow
1. Hold down the selection key for the appliance to be
programmed for 5 seconds.
2. When the key is released, it will start to flash. Insert the
code within 15 seconds (
e.g.: TV 1100
). Three flashes
indicate that the operation has been completed correctly.
1. Press the select key for which you want to know the code
and hold down for 5 seconds.
2. When the key is released it will start to flash; press and
release the 1-/- key within 8 seconds.
3. After a pause of several seconds, the indicator light
produces four series of flashes with a space between
them, corresponding to the code you are looking for. Count
the number of flashes; each series of flashes corresponds
to one figure in the code. 10 flashes correspond to 0.
4. Make a note of the code on the adhesive label inside the
battery cover for quick and easy future reprogramming.
...................................................... = 1
.......................................... = 3
= 0
....................... = 6
Code obtained = 1306
5 SEC.
or
5 SEC.
or
24
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Meliconi Gumbody DIGITAL 2 SMART at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Meliconi Gumbody DIGITAL 2 SMART in the language / languages: English as an attachment in your email.

The manual is 0,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info