673519
26
Zoom out
Zoom in
Previous page
1/29
Next page
9880022302-EN-250717.doc
26
EN
N
Built-in measurements
The dimensions of the opening to be made on the cabinet for fitting the oven are
indicated in the figures. Ensure that the cabinet where the oven is to be installed is able
to support the weight of 30 kg for FI-A36 FI-45 FI-60 FI-NB60 FI-FTO60 FI-
65; 45 kg. for FI-90 , FI-88 and FI-70; 70 kg for FI-TWIN. For the opening in the
cabinet follow the respective dimensions of the type of oven purchased, indicated in
fig.01 for FI-60 FI-NB60 FI-FTO60, fig.02 for FI-65 fig. 03 for FI-70, fig.04 for FI-
88 fig.05 for FI-90 fig.06 for FI-TWIN fig.07 for FI-A36 and fig.8 for FI-45.
It is necessary to create an opening in the rear part of the bottom of the cabinet or in the
oven support shelf, to allow sufficient air to circulate for the cooling of the oven during
functioning.
Ensure the oven is safely installed inside the cabinet. Use screws A for fixing of the
oven.
ELECTRIC CONNECTION OF THE OVEN
Make sure that the electric current has been removed before connecting the oven to
the electric mains.
Attention: During the electrical connection ensure the flexible cable is not damaged. If
it is not intact, to avoid any risk, it must be completely replaced with a cable having the
same characteristics and only by qualified and skilled staff.
The oven requires single-phase alternate current 220-230-240 V~ 50-60 Hz, using
flexible cable. Ensure the household power supply can support the electric load of the
device. (see serial plate). The electric safety of this appliance is only assured if the same
is correctly connected to a system having efficient earth connection, according to the
legal standards in force.
In case of permanent connection to the electric mains, apply a bipolar switch dimensioned to the
corresponding charge, with an opening for every contact of at least 3 mm.
In models where present, the flexible cable is supplied without plug. The plug to be used
must be suitable for the electric load of the product and must comply with the current
regulations.
The installer must ascertain that the section of the socket cables is suitable to the power
absorbed by the oven, as indicated in the serial plate.
The connection socket must be easily accessible. Disconnection of the appliance from
the electrical supply must be permitted after installation is performed.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Meireles FI-60MTO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Meireles FI-60MTO in the language / languages: English as an attachment in your email.

The manual is 1,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info