551367
3
Zoom out
Zoom in
Previous page
1/6
Next page
Power
supply
TV
AC/DC adapter
12V 150mA
Powered from
AC/DC power adaptor
Gain
adjuster
Power
supply
TV
DC 12V
+ -
Powered from
DC battery
Gain
adjuster
Once the antenna and power supply have been installed and all cables have been properly connected, you must run a channel scan before
watching TV in order to receive maximum programs. Run a channel scan as once the antenna is moved or the TV loses a channel. Now you
can enjoy the TV program after you finish running a channel scan.
STEP 5. Connect the anten na cable
Connect the antenna coaxial cable(Female F connector) to the coaxial cable(Male Fconnector) of power supply unit. See Figure11
Figure 11
Figure 12
Figure 13
STEP 6: Connect power supply MP-001 kits
Option 1: Power from AC/DC power adapter. See Figure 12.
1.Connect the cable from Antenna to power supply input.
2.Connect the output connector of the power supply unit to DTV receivers or TVs.
3.Connect the AC/DC adapter to the 12V DC jack on the power supply unit, and plug the adapter into the power socket.
4.Adjust the gain in power supply unit for best signal reception
Option 2: Power from DC battery. See Figure 13
1.Connect the cable from Antenna to power supply input.
2.Connect the output connector of the power supply unit to DTV receivers or TVs.
3.Connect the DC 12V input wires to the 12V DC jack on the power supply unit.
4.Connect the other end of the wires "+" & " -" to the 12V DC system of vehicle/yacht.
5.Adjust the gain in power supply unit for best signal reception.
Power
supply
TV
AC/DC adapter
12V 150mA
Powered from
AC/DC power adaptor
Gain
adjuster
Power
supply
TV
DC 12V
+ -
Powered from
DC battery
Gain
adjuster
Once the antenna and power supply have been installed and all cables have been properly connected, you must run a channel scan before
watching TV in order to receive maximum programs. Run a channel scan as once the antenna is moved or the TV loses a channel. Now you
can enjoy the TV program after you finish running a channel scan.
STEP 5. Connect the anten na cable
Connect the antenna coaxial cable(Female F connector) to the coaxial cable(Male Fconnector) of power supply unit. See Figure11
Figure 11
Figure 12
Figure 13
STEP 6: Connect power supply MP-001 kits
Option 1: Power from AC/DC power adapter. See Figure 12.
1.Connect the cable from Antenna to power supply input.
2.Connect the output connector of the power supply unit to DTV receivers or TVs.
3.Connect the AC/DC adapter to the 12V DC jack on the power supply unit, and plug the adapter into the power socket.
4.Adjust the gain in power supply unit for best signal reception
Option 2: Power from DC battery. See Figure 13
1.Connect the cable from Antenna to power supply input.
2.Connect the output connector of the power supply unit to DTV receivers or TVs.
3.Connect the DC 12V input wires to the 12V DC jack on the power supply unit.
4.Connect the other end of the wires "+" & " -" to the 12V DC system of vehicle/yacht.
5.Adjust the gain in power supply unit for best signal reception.
Power
supply
TV
AC/DC adapter
12V 150mA
Powered from
AC/DC power adaptor
Gain
adjuster
Power
supply
TV
DC 12V
+ -
Powered from
DC battery
Gain
adjuster
Once the antenna and power supply have been installed and all cables have been properly connected, you must run a channel scan before
watching TV in order to receive maximum programs. Run a channel scan as once the antenna is moved or the TV loses a channel. Now you
can enjoy the TV program after you finish running a channel scan.
STEP 5. Connect the anten na cable
Connect the antenna coaxial cable(Female F connector) to the coaxial cable(Male Fconnector) of power supply unit. See Figure11
Figure 11
Figure 12
Figure 13
STEP 6: Connect power supply MP-001 kits
Option 1: Power from AC/DC power adapter. See Figure 12.
1.Connect the cable from Antenna to power supply input.
2.Connect the output connector of the power supply unit to DTV receivers or TVs.
3.Connect the AC/DC adapter to the 12V DC jack on the power supply unit, and plug the adapter into the power socket.
4.Adjust the gain in power supply unit for best signal reception
Option 2: Power from DC battery. See Figure 13
1.Connect the cable from Antenna to power supply input.
2.Connect the output connector of the power supply unit to DTV receivers or TVs.
3.Connect the DC 12V input wires to the 12V DC jack on the power supply unit.
4.Connect the other end of the wires "+" & " -" to the 12V DC system of vehicle/yacht.
5.Adjust the gain in power supply unit for best signal reception.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Megasat T2 - DVB-T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Megasat T2 - DVB-T in the language / languages: English, German as an attachment in your email.

The manual is 4,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info