479179
35
Zoom out
Zoom in
Previous page
1/36
Next page
Trouble-shooting
- 35 -
Trouble-shooting
Every electric device can have a malfunction. It does not automatically mean that it is
defective. In most cases it happens because of a feed cable, plug-and-socket connections or
access mistakes. Please control the following items before taking the receiver to your
specialised dealer:
Problem Possible causes Help, Tips
Power cable not connected to
mains
Check if power cord is plugged
in correctly.
Try another electric device at
the same power socket.
Receiver can not be
turned ON
Batteries of the remote control
are not inserted / inserted faulty
Check batteries
TV set is running on wrong
channel
Check set up of the TV set No or bad picture
Scart cable is damaged or
plugged in incorrectly
Replace or plug in the Scart
cable correctly
Volume is set too low Increase volume No audio
Cable damaged or plugged in
incorrectly
Check cable and ports
Distance to big Come closer to receiver, point
remote control directly towards
receiver
Batteries are exhausted or
inserted incorrectly
Insert batteries correctly
IR receiver is covered or not
reachable by the IR signal
Remove barriers between
remote control and receiver
Remote control does
not work
Timer is activated Deactivate timer
Time is displayed
wrongfully
Difference between local time
and GMT is set incorrectly.
Enter menu Receiver setup and
set time difference correctly
Timer is activated at the
wrong time
Difference between local time
and GMT is set incorrectly.
Enter menu Receiver setup and
set time difference correctly
Coaxial cable damaged Check coaxial cable and F-plug Channel Change On
Screen graphic shows:
„short circuit or overload
at the antenna input“
LNB damaged or defective Check or exchange LNB
Interference at
programmes with a
frequency at about
12480 MHz
Interference may be caused by
cellular phones (DECT) near the
receiver
Eep more distance between
cellular phone and
receiver/antenna cable.
Cable is defect or plugged in
incorrectly
Check cable and ports
Channel has changed
transponder
Perform channel search
Satellite antenna is not installed
correctly
Re-Adjust satellite antenna
No picture,
Channel change on
screen graphic shows
”No valid signal!
Incorrect Settings in menu
Settings
Correct settings or restore the
factory default status
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Megasat HD400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Megasat HD400 in the language / languages: English as an attachment in your email.

The manual is 0,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Megasat HD400

Megasat HD400 User Manual - German - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info