551357

Megasat HD Camping Receiver Comfort Manual

32
Zoom out
Zoom in
Previous page
1/32
Next page
16
Appendix
Troubleshooting
Look through the following table about the possible troubles and you may find answers before
request service. It may help you to resolve the problems with some easy operations according to this
table. If something goes wrong with the receiver and can’t back to normal, please cut off the power for
few minutes and restart the product. If the problem remains and proves to beyond your capability, you
had better hand it over to a qualified service agent.
The integrated circuits are easily breakdown by static. Make sure the antistatic protection has been
well taken before maintenance.
Troubles Possible Cause Suggested Solutions
No power The power cord has not been well connected
Plug the power cord into the outlet tightly
and turn on the power; if still no power,
turn off the power again, and wait for 5-10
minutes, then restart again.
The antenna is not adjusted well
Adjust the antenna or use an outdoor
antenna
Antenna incorrectly
Use an antenna with 75 ȍ impedance
input
Can not scan
programs
Parameter input incorrectly
Input Frequency, Bandwidth parameter
correctly
Output cord is connected incorrectly
Connect the output cord correctly. If the
problem is still exit, the output cord may
damage.
No picture
The video output mode of the unit is different
from the mode of monitor
Reset the mode
No Color
The video output system of the unit is different
from the mode of monitor
Reset the color system
Image distortion
at channel shift
normal
Batteries incorrectly installed Install the battery correctly
Batteries exhausted Replace the battery
Beyond the effective operation range Operate within an effective range
The remote
control fails to
work
The remote sensor is pointed to by bright light. Place the unit elsewhere for a change
Audio track and
subtitle language
are not the
chosen items
Has not chosen the right sound track Press the Audio button to shift the track
The unit is in a mute status Cancel the mute
Volume is too low Augment the volume
No sound
Cable is connected incorrectly Connect the cable correctly
There might be a short circuit
Correct the output cable connection, and
turn on again.
In mute status Cancel the mute
No sound by
chance
In standby mode Turn on the unit
Poor picture
quality
Too much interferential signals Adjust the position of antenna.
No response May interfered by static Plug the power cord again
The USB cable connected incorrectly Connect the cable correctly.
The flash drive’s current is too heavy, the
product wouldn’t afford it.
Provide external power source.
Flash Drive can’t
be read
The flash drive runs self-protection program
because of external device short circuit.
Change the short circuit device and restart
the product.
… 32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Megasat HD Camping Receiver Comfort at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Megasat HD Camping Receiver Comfort in the language / languages: English, German as an attachment in your email.

The manual is 7,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info