551336
17
Zoom out
Zoom in
Previous page
1/19
Next page
ENGLISH ENGLISH
14
15
Items Features
High
Frequency
Tuner
Input Frequency Range 174 ~ 230, 470 ~~ 862MHz (VHF&UHF)
Bandwidth 7 or 8 MHz
Input Signal Level -75 ~ -20 dBm
RF Input Connector IEC169-2, Female
Input impedance 75 Ω
Demodu-
lation Mode
Waveform COFDM (Code Orthogonal Frequency Division Multi-
plexing)
Demodulation QAM16, QAM64
Transmission Mode 2K, 8K
Guard interval 1/4, 1/8, 1/16, 1/32
Code rate 1/2, 2/3, 3/4, 5/6, 7/8
Video
Audio
Decoding
Video decoding ISO/IEC13818-2 MPEG2 (MP@ML) Compatible
Video resolution PAL 720×576/ NTSC 720X480
Video input code rate 15Mbit/s Max.
Teletext Support DVB-ETS300472
Audio decoding ISO 11172-3
Audio Track Stereo, Monophony (Left, Right)
Audio Sample rate 32, 44.1, 48KHz
USB
USB Port USB2.0
Format MPEG/MP3/WMA/JPEG
Supported SD/MMC/MS Card
Power
Voltage Range ~165-264V, 50Hz
Rated Voltage 230V,50Hz
Rated Consumption 5 W
Standby Consumption ≤ 0,5 W
Work
Environment
Temperature 0° ~ 40°
Humidity < 90%
Dimensions
Weight ~ 0,5 kg (brutto) 0,3 kg (netto)
Size 180(W) x 113(D) x 34(H) mm
Specications
Troubleshooting
Problem Possible causes What to do
LED on the front panel fail to
light up/is not lit.
No picture or sound.
Bad picture/blocking error
No startup menu on screen after
turning on STB for the first time.
The remote control is not wor-
king.
Poor picture quality or Less
channels in scanning.
You have forgotten your pass-
word.
Check if the main supply cable is
plugged into the power socket.
Adjust the dish. Check the sig-
nal strength indicator in one of
the channels search submenus.
Check the cable connections,
LNB and other equipment con-
nected to LNB & receiver, or
adjust dish. Replace the LNB.
Replace the cable.
Adjust the dish. Connect an at-
tenuator to LNB input. Change
to a larger dish. Change LNB
with lower noise factor. Replace
the LNB.
Switch the TV to the appropriate
AV input.
Change the batteries (both).
Aim the remote control at the
STB. Check that nothing blocks
the front panel. Check if LED
indicator on the front panel is
showing the time, press the po-
wer button to switch off standby
mode.
Change the LNB power to
14V/19V in Antenna setup
menu.
Contact the dealer or Service
Provider. They will help you set
it up again.
Main supply cable is not con-
nected.
Satellite dish is not aiming to
satellite accurately. No signal or
weak signal. The LNB is faulty.
The cable is faulty.
Satellite dish is not aiming to the
satellite accurately. Signal too
strong. Satellite dish is too small.
LNB noise factor too high. The
LNB is faulty.
The system is connected by
SCART cable and the TV is not in
AV/ EXT mode.
Battery exhausted. Remote con-
trol is not aimed correctly STB is
in standby mode.
Low LNB power or signal loss in
cable.
You might meet abnormal working of this STB with various reasons. Check the following which may help you.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Megasat 630T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Megasat 630T in the language / languages: English, German as an attachment in your email.

The manual is 0,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info