168729

MB Quart pab 4100 Manual

9
Zoom out
Zoom in
Previous page
1/88
Next page
9
English
MBQR-1
2 way active, or bi-amplifi ed system
with mono bass
This application shows how easily a 2 way active system can be imp-
lemented using a Premium 4 channel amplifi er. Channels 1 and 2 will
be used for highs, and channels 3 and 4 for mono bass.
Interconnect cable checklist:
We need to feed the same signal to both sets of channels, so must
use 2 Y-adapters, one to feed the LEFT signal to channels 1 and 3, and
the right signal to channels 2 and 4, as shown.
Mono bass woofer wiring:
Connect the mono speaker positive terminal to the LEFT +, and its
negative terminal to RIGHT -.
Switch setting checklist:
- 1/2CH X-OVER: HI
- 3/4CH X-OVER: LP/BP
Crossover frequency control checklist:
Channels 1/2:
Channels 3/4:
- HI PASS: 100 Hz
- HI PASS (subsonic): 20 Hz
- LOW PASS: N/A
- LOW PASS: 100 Hz
Please note that these frequency points are suggestions only. Refer to
the loudspeaker manufacturer specifi cations and the section “Setting
up systems after installation for best performance”
Level control checklist:
Refer to the section “Setting up systems after installation for best
performance”
Minimum fi nal loudspeaker impedances:
- 2 ohm per channel in stereo mode
- 4 ohm mono bridged
MBQR-1
2 way active, or bi-amplifi ed system
with mono bass, and faded highs/lows
Here we present a variation of the previous system. Since this is a 2
way system, we can use the front outputs from a head unit to drive
the highs, and the rear output to drive the bass This method allows
the listener to easily adjust the relative levels of bass to highs, with
the front to rear fade on the head unit.
Channels 1 and 2 will be used for highs, and channels 3 and 4 for
mono bass.
Interconnect cable checklist:
- Use good quality RCA leads to connect the inputs of the amplifi er
to the source as shown.
- Follow the instructions as per the previous system for switch and
crossover settings.
AMPLIFIER APPLICATIONS
PAB 4100 4-Channel Amplifi er
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for MB Quart pab 4100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of MB Quart pab 4100 in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 11,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info