629542
22
Zoom out
Zoom in
Previous page
1/22
Next page
TRANSPONDER LIST
> While in the “Main Menu”, go to “Installation” by
using “ ”/“ ” and “”/” buttons and press the
OK” button. Press the “OK” button again on “Trans-
ponder” option. The “Transponder List” sub-menu is
entered.
> There is a transponder list of a particular satellite in
the left column and the program list belonging to that
transponder in the right column shown in the
Transponder List” menu. Press the “RED” button
to select a satellite. When the “GREEN” button is
pressed, the cursor moves to the “Program List
column. You can add a new transponder by pressing
the “BLUE” button or you can delete a transponder by
pressing the YELLOW” button.
> While in the “Transponder List” menu, go to any
transponder and press the “OK” button.
Transponder” menu appears. There are ”Ops. Menu”
and “Search” options in this menu.
> Press the “OK” button when “Ops. Menu” is
selected. “Transponder Settings” menu is accessed.
Select the satellite you want to make changes to by
using “ ”/“ ” buttons.
> By using “”/” buttons, you can highlight
“Frequency, “Symbol Rate” and “Polarity. By using
“ ”/“ ” or number buttons on the remote control
their values may be changed. By viewing the Signal
Strength and Signal Quality at the bottom of the menu
it can be seen if the correct information has been
entered. If it has, press the “BLUE” button to store the
information.
22 23
MAIN MENU
Pressing the “MENU” button when there is no menu
shown on the screen will access the “Main Menu
By using the “ ”/“ ” and “”/” buttons you
can move the cursor right, left, up and down. You
can move onto the symbol you want and enter the
sub-menu belonging to that symbol by pressing the
OK” button.
> There are “Installation”, “System, “Timers,
“Extras” and “Games” sub-menus in the “Main Menu”.
> You can move the cursor up and down in the
sub-menus by using the “”/” buttons.
> Exit from the “Main Menu” and sub-menus by
pressing “MENU” or “EXIT” button.
INSTALLATION
> When in the “Main Menu” go to “Installation” by
using “ ”/“ ” and “”/” buttons and press the
OK” button. The “Installation” sub-menu is displayed.
> There are “Satellite, “Transponder, “Manual Edit /
Search” and “Automatic Search” options in this menu.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Maxview MXL002 OMNISAT DOME at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Maxview MXL002 OMNISAT DOME in the language / languages: English as an attachment in your email.

The manual is 7,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info