472164

Maxi-Cosi Axiss 2012 Manual

5
Zoom out
Zoom in
Previous page
1/33
Next page
(Fig. 5 - 12)
INSTALLING THE CAR SEAT INTO THE CAR: « IN THE
DIRECTION OF TRAVEL »
IMPORTANT: Before you begin using the Maxi-Cosi Axiss,
you should ensure that the spaces have been removed from
the seatbelt guides. These form part of the packaging and
should be removed.
Installing the car seat into the car: « in the direction of
travel ».
1. Place the lap section of the seatbelt behind the two seat
belt guides (a) on the car door side and then around the
underside of the car seat (b).
2. Then place the lap section of the seat belt on the other
side, behind the two belt guides (a). Fasten the seat
belt (b) and tighten it. IMPORTANT: Ensure that the lap
section of the seat belt is tight and passes through the 4
belt guides around the base . The seat belt should not be
twisted.
3. Rotate the seat part towards you by opening the lever
(a). Keep the handle open and rotate the seat shell
towards you with your other hand (b). IMPORTANT: the
button under the base should be adjusted to the desired
direction of rotation beforehand (see page 9).
4. Rotate the seat belt tensioner as far as it will go (see
diagram).
1110
5. (a) Place the shoulder section of the seat belt in the belt
guide on the upper side of the base.
(b) Fasten the shoulder belt into the slot of the seatbelt
tensioner spindle. IMPORTANT: Ensure that the lap
section of the seat belt is tight. There should be NO slack
in the lap section of the belt (this can be checked by
gently pulling the lap section of the belt).
6. Move the handle on the seat belt tensioner backwards
and forwards a few times until the belt is fully tightened
(do not push the button on the tensioner). IMPORTANT:
if the belt is tight, the handle should be closed
again. (*see diagram).
7. Rotate the seat shell to face the direction of travel. The
green indicator will be visible on the upper side of the
base. The green indicator shows that the seat shell is
safely locked into position in the direction of travel.
IMPORTANT: even when travelling with the car seat
unoccupied, it should always be locked into position in
the direction of travel.
Check that the car seat is installed correctly (according
to the diagrams). Proper threading of the seat belt is
essential to ensure the safety of your child. To fasten the
car seat into the car, the seat belt should pass along the red
markings on the Maxi-Cosi Axiss. You should also refer to the
instruction sticker on the side of the Maxi-Cosi Axiss. Never
fit the seat belt in a way other than that described! Any other
way of installing this seat is unsafe.
IMPORTANT: when you have finished installing your
Maxi-Cosi Axiss, check the following points and correct
your installation if necessary:
IMPORTANT: When the child is seated in the Maxi-Cosi
Axiss, the seat shell should be locked into position facing the
direction of travel. Only then should the car be driven.
IMPORTANT:
- Ensure that the seat belt is not twisted.
- Ensure that the seat belt is fastened properly.
IMPORTANT: in some cars it may be necessary to push the
upper side of the seat shell downwards to lock the shell in
place (green indicator).
(Fig. 13- 14)
The car seat is not stable
• Raisetheheadresttoahigherposition.Theheadrest
should NOT come into contact with the Maxi-Cosi Axiss.
• Wheneverpossibleandwhenevernecessary,adjust
the angle of the backseat’s backrest so that it is in full
contact with the base of the car seat.
The seat shell is difficult to rotate and/or locking the
seat shell into position in the direction of travel (green
indicator) is difficult.
Check the installation:
• Theseatbeltmustpassthroughallbeltguides.
• ThelapsectionofthebeltmustTIGHTLYpassthrough
the belt guides, with no slack.
• Theseatbeltshouldnotaffecttheseatpartofthecar
seat.
• Theseatbelthaspossiblybeenfastenedtootight.
• Thepositionofthebackrestandbackseatcouldbethe
cause of the problem – adjust the angle between the seat
and the backrest.
• Ifpossible,adjustthebackrestsothatitiscompletelyin
contact with the base of the car seat.
• Checkthatnothingisimpedingorobstructingthecar
seat.
If you are still unable to rectify the problem, we
suggest you contact the retailer from which you have
purchased the car seat.
OKOK
OK
OKOK
NO NO
NO
NO
NO NO
OK
NO
NO
OK
English
English
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Maxi-Cosi Axiss 2012 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Maxi-Cosi Axiss 2012 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 3,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info