545558
6
Zoom out
Zoom in
Previous page
1/133
Next page
SFX SERIES USER’S GUIDE
Rev 2.2 4
Getting Started
General
International Datacasting Corporation (IDC) would like to thank you for purchasing your SFX Series SuperFlex
Satellite Receiver (herein referred to as the “satellite receiver”). This User’s Guide provides the essential
information required to get started with installation and basic operation of your satellite receiver. The intent of
this guide is to give you enough information so that you can power up the unit and perform enough
operations to communicate with it using the Front Panel or Web GUI. With these interfaces, you can
configure the receiver to lock to a RF carrier, and perform normal operations for your network. You will also
be able to access this User’s Guide on the hard drive, from the Web GUI (via LAN connection).
This chapter provides information to familiarize you with the satellite receiver, as it comes out of the box. This
information can be used to step through a preliminary investigation of the unit you have received, as well as initially
applying power to ensure that it is operating correctly and has not been damaged during transit.
The illustrations that are provided in this chapter identify indicators and connectors on the satellite receiver, in the rack
mount configuration. Acquaint yourself with these parts as illustrated, and refer to the physical unit itself. Throughout
the remainder of this Guide, reference will be made to these parts.
Once installed and powered, varying levels of Status and Control for configuration of the satellite receiver will be
available through one of the following: locally using the Front Panel LCD Display/Keypad, remotely using the Terminal
Interface over SSH or via the RS-232 port, remotely using the Web based Graphical User Interface (GUI), remotely
using SNMP, or remotely using IDC’s NetManager2. This Guide will describe the essential functions for setting up the
satellite receiver so that you can begin communicating and configuring the unit.
What You Should Have Received
You should have received the following package:
One (1) SFX series satellite receiver,
One (1) power cord, suitable for use in your country;
One (1) copy of this User’s Guide (optional) – also available online from the IDC customer service FTP site -
see Chapter 3 for contact information.
It is highly recommended that you retain one set of box and foam packaging that came with the unit, in the rare event
that it has to be shipped back for repair.
Chapter 1
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Max SFX Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Max SFX Series in the language / languages: English as an attachment in your email.

The manual is 4,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info