Manual Max EQ-3 (page 49 of 52) (English, German)

491040

Zoom out

Zoom in

1/52

ting costs. Meanwhile, in this phase the display of the MAX!

wall thermostat and all taught-in devices will show the open

window symbol ( ).

Combined with a MAX! Window Sensor the opening and

closing of a window will be detected time-accurate. The

temperature will only be reduced to the factory setting of

12° C while the window is opened. Once the MAX! Window

Sensor registers the closing of the window, all components

installed in the room will be reset to the previous mode.

To change the reduced temperature setting proceed as

follows:

• Press the Mode button for more than 3 seconds.

• Select the “AEr” menu item with the (+) and (-) buttons.

• Conrm the setting with the OK button.

• Set the temperature with the (+) and (-) buttons.

• Conrm the setting with the OK button.

17.9 Setting the offset temperature (tOF)

As the temperature is measured on the room control unit the

temperature distribution can vary throughout a room. To

adjust this, a temperature offset of ±3.5°C can be set. If a

nominal temperature of e.g. 20°C is set at the room con-

trol unit but the room presents with only 18°C an offset of

-2.0°C needs to be set.

• Press the Menu button for more than 3 seconds.

• Select the “tOF” menu item with the (+) and (-) buttons.

• Conrm the setting with the OK button.

• Set the offset temperature with the (+) and (-) buttons.

• Conrm the setting with the OK button.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Max EQ-3 in the language / languages: English, German as an attachment in your email.

The manual is 1,33 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Max EQ-3 Manual

Product: