738352
4
Zoom out
Zoom in
Previous page
1/16
Next page
4
GROUNDING INSTRUCTIONS
The equipment must be grounded. If it should malfunction or
breakdown, grounding provides a path of least resistance for electric
current to reduce the risk of electric shock. The unit is equipped with
a cord having an equipment-grounding conductor and a grounding
plug. The plug must be plugged into an appropriate outlet that
is properly installed and grounded in accordance with all local
codes and ordinances. If the user does not follow these grounding
instructions, the user could void the Matrix limited warranty.
ADDITIONAL ELECTRICAL INFO
In addition to the dedicated circuit requirement, the proper
gauge wire must be used from the circuit breaker box, to each
outlet that will have the maximum number of units running
off of it. If the distance from the circuit breaker box to each
outlet, is 100 ft (30.5 m) or less, then 12 gauge wire should be
used. For distances greater than 100 ft (30.5 m) from the circuit
breaker box to the outlet, a 10 gauge wire should be used.
ENERGY SAVING / LOW-POWER MODE
All units are congured with the ability to enter into an energy
saving / low-power mode when the unit has not been in use
for a specied period of time. Additional time may be required
to fully reactivate this unit once it has entered the low-power
mode. This energy saving feature may be enabled or disabled
from within the ‘Manager Mode’ or ‘Engineering Mode.’
ADD-ON DIGITAL TV (T5X)
Additional power requirements are not needed for the
add-on digital TV. An RG6 coaxial cable with ‘F Type’
compression ttings will need to be connected between
the video source and each add-on digital TV unit.
DEDICATED CIRCUIT AND ELECTRICAL INFO
A “Dedicated Circuit” means that each outlet you plug into should
not have anything else running on that same circuit. The easiest
way to verify this is to locate the main circuit breaker box, and turn
off the breaker(s) one at a time. Once a breaker has been turned
off, the only thing that should not have power to it are the units
in question. No lamps, vending machines, fans, sound systems, or
any other item should lose power when you perform this test.
Non-looped (isolated) neutral/grounding means that each circuit
must have an individual neutral/ground connection coming from
it, and terminating at an approved earth ground. You cannot
“jumper” a single neutral/ground from one circuit to the next.
ELECTRICAL REQUIREMENTS
For your safety and to ensure good treadmill performance, the
ground on this circuit must be non-looped (isolated). Please refer
to NEC article 210-21 and 210-23. Your treadmill is provided with a
power cord with a plug listed below and requires the listed outlet. Any
alterations of this power cord could void all warranties of this product.
For units with an integrated TV (like the 7xe and 7xi), the TV power
requirements are included in the unit. An RG6 coaxial cable with ‘F Type’
compression ttings on each end will need to be connected to the cardio
unit and the video source. For units with an add-on digital TV (5x only), the
machine in which the add-on digital TV is connected to powers the add-on
digital TV. Additional power requirements are not needed for the add-on
digital TV. For units with an add-on PCTV (5x
only), the TV power requirements are separate.
110 V UNITS
All Matrix 5x, 7xe and 7xi 110 V treadmills
require the use of a 100-125 V, 60 Hz and a
20 A “Dedicated Circuit”, with a non-looped
(isolated) neutral/ground for power. This
outlet should be a NEMA 5-20R and have
the same conguration as the plug. No
adapter should be used with this product.
220 V UNITS
All Matrix 5x, 7xe and 7xi 220 V treadmills
require the use of a 216-250 V, 50 Hz and a
20 A “Dedicated Circuit”, with a non-looped
(isolated) neutral/ground for power. This
outlet should be a NEMA 6-20R and have
the same conguration as the plug. No
adapter should be used with this product.
POWER REQUIREMENTS
FCC REGULATIONS
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However,
there is no guarantee that interference will not occur
in a particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try
to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV
technician for help.
FCC RF Radiation Exposure Statement:
1. This Transmitter must not be co-located or
operating in conjunction with any other antenna
or transmitter.
2. This equipment complies with FCC RF radiation
exposure limits set forth for an uncontrolled
environment. This equipment should be installed
and operated with a minimum distance of 20
centimeters between the radiator and your body.
North American
power cord plugs
shown. Depending
on your country, the
plug type may vary.
110 NEMA 5-20P
PLUG
220 NEMA 6-20P
PLUG
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Matrix T5x at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Matrix T5x in the language / languages: English as an attachment in your email.

The manual is 1,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Matrix T5x

Matrix T5x User Manual - English, German, Dutch, French, Italian, Polish, Portuguese, Spanish - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info