738354
17
Zoom out
Zoom in
Previous page
1/20
Next page
16
CHAPTER 6: Preventative maintenance
UPPER CHAIN DRIVE MAKING A PRONOUNCED CLICKING NOISE
Over time, it is normal for the drive chains to stretch with use. The
Krankcycle is equipped with automatic chain tensioning devices, but the
chain may need to be replaced if it has stretched too far. Follow the next
steps to check for excessive chain wear or stretch. If the chain needs to be
replaced,contact MATRIX customer service.
Remove the RIGHT crank arm by removing 5 socket head cap screws with a
4mm ALLEN KEY WRENCH then remove the upper outside plastic cover by
removing 5 socket head cap screws with a 3mm ALLEN KEY WRENCH.
If the chain is rubbing on the inside covers the chain should be replaced by
a service technician
Replace upper outside plastic cover and
RIGHT crank arm
LOWER CHAIN DRIVE MAKING A PRONOUNCED CLICKING NOISE
Over time, it is normal for the drive chains to stretch. The Krankcycle
is equipped with automatic chain tensioning devices, but the chain may
need to be replaced if it has stretched too far. Follow the next steps to
check for excessive chain wear or stretch.
Remove both of the lower plastic covers by removing 9 socket head cap
screws with a 3mm ALLEN KEY WRENCH and 5mm ALLEN KEY WRENCH.
If the chain is rubbing on the inside covers or exhibits too much play
around the sprockets the chain should be replaced by a service technician.
Replace both lower plastic covers.
CYCLE DIFFICULT TO PUSH WHEN MOVING
The front rolling wheels may need lubrication. Remove both wheels by
unscrewing the nut and bolt. Lubricate the outside of steel axle tube (A).
Replace both wheels using a 10mm WRENCH.
RESISTANCE KNOB DOES NOT ROTATE SMOOTHLY
The resistance cable mechanism may need lubrication. Remove the
resistance knob by removing the 1 socket head cap screw with a 4mm
ALLEN KEY WRENCH. Lubricate the cable mechanism (B) through the
opening in the plastic cover. Replace the resistance knob.
A
B
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Matrix Krankcycle at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Matrix Krankcycle in the language / languages: English as an attachment in your email.

The manual is 3,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info