785574
2
Zoom out
Zoom in
Previous page
1/4
Next page
6 December 2008 / Multipurpose Contact Output / NL
1 ALGEMENE INFORMATIE
1.1 Gebruik van deze handleiding
Copyright © 2008 Mastervolt. Alle rechten
voorbehouden. Onrechtmatige reproductie,
overdracht, distributie of opslag van dit document of
een gedeelte ervan in enige vorm zonder
voorafgaande geschreven toestemming van
Mastervolt is verboden. Deze handleiding dient als
richtlijn om de Multipurpose Contact Output op een
veilige en doelmatige wijze te bedienen. Bewaar
deze handleiding op een veilige plaats!
1.2 Garantiebepalingen
Mastervolt garandeert dat het apparaat is gebouwd
volgens de wettelijk van toepassing zijnde normen
en bepalingen. De standard garantietermijn
bedraagt twee jaar. Wanneer niet volgens de in
deze gebruikershandleiding gegeven voorschriften,
aanwijzingen en bepalingen wordt gehandeld,
kunnen beschadigingen ontstaan en/of het apparaat
zal niet aan de specificaties voldoen. Eén en ander
kan inhouden dat de garantie komt te vervallen.
1.3 Aansprakelijkheid
Mastervolt kan niet aansprakelijk worden gesteld
voor:
gevolgschade ontstaan door het gebruik van de
Multipurpose Contact Output;
eventuele fouten in bijbehorende handleidingen
en de gevolgen daarvan.
gebruik dat niet overeenkomt met de
bestemming van dit produkt.
LET OP!
Verwijder nooit de typenummerplaat!.
2 BEDIENING
De werking van de Multipurpose Contact Output is volledig op MasterBus gebaseerd. Zie www.mastervolt.com
voor informatie over MasterBus en de MasterBus Eventstructuur. De tabel hieronder toont de functies van de
Multipurpose Contact Output.
Monitoring Omschrijving Fabrieks-
instelling
Bereik
Staat Het relaiscontact kan worden ingeschakeld of op
standby worden gezet.
Standby Standby/ Ingeschakeld
Overnemen Met overnemen zet u het relais handmatig om. Standby Geactiveerd/ Standby
Configuratie
Taal Stel menutaal in van Multipurpose Contact Output Engels Zie specificaties
Apparaatnaam Een naam naar keuze met maximaal 12 tekens DC Relay Maximaal 12 tekens
Puls (1 sec) Mogelijkheid om een startpuls van 1 seconde te
genereren, dit is nodig voor sommige generatoren.
Uit Uit, Aan
Min. looptijd Optie om de minimum looptijd te gebruiken. Uit Uit, Aan
Min. looptijd Stel de minimum looptijd in, indien ingeschakeld. 15 minutes 15 minuten-45 dagen
Max. looptijd Optie om de maximum looptijd te gebruiken. Uit Uit, Aan
Max. looptijd Stel de maximum looptijd in, indien ingeschakeld. 8 uur 15 minuten-45 dagen
2.1 CSI voor de ChargeMaster
De Multipurpose Contact Output kan worden gebruikt als CSI (Charger Status Interface) voor de ChargeMaster,
schakelend bij een laderfout. CSI configuratie gebeurt bij de ChargeMaster onder Configuration/ Events:
Event source Event target Event command Event action
Failure DC Relay Activate Copy
On DC Relay Activate Inverted copy
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mastervolt Multipurpose Contact Output at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mastervolt Multipurpose Contact Output in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0.38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info