785594
4
Zoom out
Zoom in
Previous page
1/8
Next page
4
April 2016 / MasterBus – FireCAN Interface / EN
3.2 FIRECAN
In the FireCAN group on the configuration page you
can configure the FireCAN settings. When the “Auto”
checkbox (see figure 2 (a)) is activated the
configuration is done automatically. Otherwise the
configuration has to be done manually.
Use Auto configuration when you have a MasterBus
network with only one charging device
If you have more than one charger and want to
transmit information of all chargers you will need to
use one FireCAN interface for each charging device.
3.2.1 Auto configuration
In Auto configuration the FireCAN will find a
charging device on the MasterBus and set the
configuration parameters accordingly. Table 2.
shows all the possible charging devices.
Charging devices Article number
Mass Combi Ultra 12/3000 38013000
Mass Combi Ultra 24/3500 38023500
Mass Combi Ultra 48/3500 38043500
Mass Charger 24/15-2 40020156
Mass Charger 24/25-2 40020256
Mass Charger 24/25-2 DNV 40720266
Mass Charger 24/50-2 40020506
Mass Charger 24/75 40020756
Mass Charger 24/100 40021006
Mass Charger 24/50-3ph 40031010
Mass Charger 24/100-3ph 40031006
Mass Charger 48/25 40040256
Mass Charger 48/50 40040506
Serial interface with
Mass Combi 77030450
Combi interface with
Mass Combi 77030475
ChargeMaster 12/25-3 44010250
ChargeMaster 12/35-3 44010350
ChargeMaster 12/50-3 44010500
ChargeMaster 12/70-3 44010700
ChargeMaster 12/100-3 44011000
ChargeMaster 24/12-3 44020120
ChargeMaster 24/20-3 44020200
ChargeMaster 24/30-3 44020300
ChargeMaster 24/40-3 44020400
ChargeMaster 24/60-3 44020600
ChargeMaster 24/80-3 44020800
ChargeMaster 24/100-3 44021000
Table 2: Overview of charging devices recognized in
Auto mode
The configuration parameters can be viewed but not
changed in Auto mode. The automatic configuration
will always choose the default Node ID of 16 for the
FireCAN network. If you have more than one
charger and want to transmit information of all
chargers you will need to use a sequence of Node
ID’s on the FireCAN network..
A new charging device will be selected when the
selected device is not responding.
3.2.2 Manual configuration
In Manual configuration (“Auto” not activated) you
have to make all the configurations yourself.
The easiest way is to use MasterAdjust,
see Figure 2 for more details. Some data fields
require you to enter an index. See paragraph 3.5 on
getting this information from MasterAdjust.
A quick way of only configuraring 1 charger
in a Masterbus network with multiple
charging devices is;
1. Connect only one Charging device, by
removing the other devices from the
MasterBus.
2. Select Auto, and wait until the
configuration is automatically made
for the Charging Device.
3. Uncheck the Auto mode, which
prevents the FireCAN interface from
switching to another Charging Device.
4. Reconnect the other Charging
Devices.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mastervolt MasterBus FireCAN Interface at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mastervolt MasterBus FireCAN Interface in the language / languages: English as an attachment in your email.

The manual is 0.19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info