786819
1
Zoom out
Zoom in
Previous page
1/2
Next page
Installation
Installation Installatie
Installation IVET
ENGLISH: Connect the AC load to the AC output (OUTPUT). For safe installation it is necessary to:
Connect both the earth (PE/GND) and the neutral (N) of the AC output of the IVET to the central grounding point
which is connected to the hull of the ship.
Integrate a Residual Current Device (RCD) in wiring of the AC output
Refer to local applicable regulations on these issues
Connect the incoming shore power to the AC input (INPUT). Phase line to L and Neutral to N.
Do NOT connect the ground wire (PE/GND) of the shore power to the central grounding point (hull of the ship), neither
to the PE/GND connection of the output!
NEDERLANDS: Sluit de belasting aan op de AC uitgang (OUTPUT). Voor een veilige installatie dient u:
zowel de aarde (PE/GND) als de nul (N) van de uitgang van de IVET door te verbinden met het centraal aardpunt,
welke in verbinding moet staan met de romp van het schip.
in het uitgangscircuit van de IVET een 30mA aardlekschakelaar op te nemen.
Raadpleeg hiertoe de plaatselijk geldende richtlijnen.
Sluit de bedrading naar de walstroom aan op de AC ingang (INPUT), fase op L en nul op N.
De aardedraad (PE/GND) van de walstroom mag niet aangesloten worden op het centraal aardpunt (romp van het
schip) of de PE/GND aansluiting van de AC-uitgang!
DEUTSCH: Schließen Sie die AC-Last an den AC-Ausgang (OUTPUT) an. Für eine sichere Installation ist es
erforderlich:
sowohl die Erde (PE/GND) und den Nullleiter (N) des AC-Ausgangs des IVET an den zentralen Erdungspunkt
anzuschließen, der mit dem Rumpf des Schiffes verbunden ist.
ein Reststromgerät (RCD) in der Verkabelung des AC-Ausgangs zu installieren.
Nehmen Sie hinsichtlich dieser Punkte Bezug auf die örtlich anwendbaren Vorschriften.
Schließen Sie den eingehenden Landstrom an den AC-Eingang (INPUT) an, die Phasenleitung an L und den Nullleiter
an N.
Schließen Sie den Erdungsdraht (PE/GND) des Landstroms NICHT an den zentralen Erdungspunkt (Schiffsrumpf) an
und ebenfalls nicht an den PE/GND-Anschluss des Ausgangs!
FRANÇAIS : Raccorder la charge CA à la sortie CA (OUTPUT). Pour sécuriser l'installation, vous devez :
Raccorder à la fois la terre (Mise à la terre) et le neutre (N) de la sortie CA de l’IVET au point de masse central
connecté à la coque du bateau.
Intégrer un dispositif de courant résiduel (DCR) dans le câblage de la sortie CA.
Se référer à ce sujet aux réglementations locales en vigueur
Connecter l'alimentation quai entrante à l'entrée CA (INPUT). La ligne de phase au L et le Neutre au N.
Ne PAS connecter le fil de terre (Mise à la terre) de l'alimentation quai au point de masse central (coque du bateau), ni
à la connexion Mise à la terre de la sortie !
Only allow changes in your electrical system to be carried out by qualified electricians!
Laat veranderingen aan uw elektrische installatie alleen door gekwalificeerde elektriciens uitvoeren!
Sie sollten Änderungen Ihres Elektrosystems nur von qualifizierten Elektrikern durchführen lassen!
Seuls des électriciens qualifiés peuvent apporter des modifications à votre système électrique !
SPECIFICATIONS
IVET w/o Cabinet (IP00) 2.5 kVA up to 22 kVA
IVET in Dakar cabinet (IP23) 2.5 kVA up to 4.5 kVA
IVET in Steel plate cabinet (IP23) 6.0 kVA up to 22 kVA
Produced according to: VDE 0550, VDE 0532
Isolation class: T 40/E
Transformer type: E-core
Input voltage: 110 – 220 – 240 Volt
Output voltage: 110 – 220 – 240 Volt
Phase: 1
Input frequency: 50 / 60Hz
Output frequency: Same as input frequency
Cooling: Natural convection
Automatic voltage selector No (optional)
Soft start included No (optional)
Circuit breaker included No Dimensions of the E-core transformer IVET without cabinet
Mastervolt International B.V, P.O.Box 22947, NL-1100 DK Amsterdam, The Netherlands. Tel.: +31-20-3422100 Email: info@mastervolt.com Web: www.mastervolt.com v2.0 060901
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mastervolt IVET 4.5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mastervolt IVET 4.5 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0.08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info