The door was not closed far enough when the lock button was pushed,
and the bolts hit the safe wall
Scan your finger or use the key to retract the bolts and repeat the closing process. The
locking button will not function if this problem occurs
Red indicator light blinks and there are 3 beeps
after opening the safe
Battery power is lowInstall four (4) new AA alkaline batteries
Safe door will not open1. Override key is in the locked position
2. Battery power is low
1. Ensure that the key is in the unlocked position
2. Replace batteries
Safe door will not open (no lights or sound)Battery power is deadUse the Micro USB to open the safe and replace batteries or use the override key to open
the safe
Red indicator light blinks and the safe beeps
five times
The fingerprint memory is fullDelete fingerprints
Red indicator light blinks and the safe does
not open
Sensor failed to read fingerprintReview the additional notes in the fingerprint programming section
Can’t enroll finger or fingerprint will not unlock
the safe
The scanner is unable to identify the fingerprint1. Do not choose a finger with a cut or scar
2. Make sure hands are clean and dry before programming or operating the
fingerprint scanner
3. The fingerprint sensor may not work well when cold
Troubleshooting
ENGLISH
Warranty:
Limited Two-Year Manufacturing Warranty
This product is warranted to the original purchaser for two (2) years from the date of purchase. If during that two-year period, this product or any part of the product fails due to a defect in materials or workmanship, Master
Lock Company LLC (“Master Lock”) will at its own and sole discretion, repair or replace the product or part free of charge for the original purchaser. Simply contact Master Lock at the most convenient site listed below for
instructions on obtaining repair or replacement. Return of the defective product or part at the customer’s expense, along with proof of purchase, may be required. This limited warranty applies only to defects in materials
and workmanship, and does not cover products which have been abused, altered, or misused. This limited warranty also does not cover damage resulting from fire (except for fire-resistant products) or from water (except for
water-resistant products), or from theft or vandalism.
THIS WARRANTY IS LIMITED TO REPAIR OR REPLACEMENT ONLY. The limited warranty does not cover labor for removing, reinstalling or refinishing the product or part, or other materials removed, reinstalled or refinished in
order to repair or replace the product or part. TO THE EXTENT PERMITTED BY LAW, MASTER LOCK DISCLAIMS ALL OTHER IMPLIED OR EXPRESS WARRANTIES INCLUDING ALL WARRANTIES OF MERCHANTABILITY AND/OR FITNESS
FOR A PARTICULAR PURPOSE. TO THE EXTENT THAT ANY IMPLIED WARRANTIES MAY NONETHELESS EXIST BY OPERATION OF LAW, SUCH WARRANTIES ARE LIMITED TO THE DURATION PROVIDED BY LAW.
LIMITATION OF LIABILITY:
The statements made herein are your sole and exclusive remedy against Master Lock and Master Lock shall not be liable for any damages, whether direct, indirect, incidental, special, consequential, exemplary, or otherwise,
including property damage or property loss (including loss or damage of the contents of any product), lost data, lost revenues and lost profits, arising out of any theory of recovery, including statutory, contract or tort.
Notwithstanding the term of any limited or implied warranty, or in the event that any of these limited warranties fails of its essential purpose, in no event will Master Lock’s entire liability exceed the purchase price of this
product. Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages so the above limitations or exclusions may not apply to you. Some states and provinces do not allow
limitation on how long a limited warranty lasts, so the above limitation may not apply to you. These limited warranties give you specific legal rights, and you may also have other rights which vary from state to state and
province to province. Products purchased in the EU are governed by consumer laws which provide statutory guaranty rights in addition to the warranty stated on any packaging or website associated with this product.
Any warranty stated on any packaging or website associated with this product is not valid in Australia. Product sold in Australia is governed by the consumer warranty contained in the Australian Consumer Law.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Master Lock LX110B Sentrysafe at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Master Lock LX110B Sentrysafe in the language / languages: All languages as an attachment in your email.
The manual is 1.19 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.