788783
2
Zoom out
Zoom in
Previous page
1/8
Next page
2
ENGLISH
NOTE: Make sure the handle is rotated all the way up in the
horizontal position before unlocking the safe.
If the door does not open easily, repeat steps 1-5.
If you exert too much force on the handle, the handle will
move without moving the bolts. If this happens, you will
hear a ’click.’ DO NOT be alarmed. This feature is designed
to protect the bolts from being overpowered by force. If this
occurs, simply exert force in the opposite direction (lifting up)
until the handles ’clicks’ back into place and repeat steps 1-5
to open your safe.
Locking your safe
1 Close the door and pull the
handle upward until the handle
is horizontal.
For water-resistant units,
additional pressure to the front,
left side of the door may need to
be applied prior to rotating the
handle.
2 Spin the dial at least 2x to the
right (clockwise).
3 FOR DUAL KEY/COMBINATION
LOCKS ONLY, insert key into the
lock, turn to the ’locked’ position,
then remove the key.
Programmable Electronic Lock
NOTE: Store code (and keys if
equipped) in a secure location
(other than in the safe).
Preparing your safe for first time use
1 Ensure any shipping screws have
been removed. Located on the
inside of the door.
NOTE: Your unit may or may not
have a shipping screw.
Fire Safe
Thank you for choosing Master Lock to store all your important documents and valuables.
We hope that this product will help you stay organized and provide you with the peace-of-mind of knowing the things most important to you are protected.
Warning
Gun warning
This product is not intended for the secure storage of all materials.
Items such as firearms, other weapons, combustible materials, or
medication should NOT be stored in this unit.
Warning
DO NOT store delicate items directly in your safe.
Master Lock products which offer fire protection have a proprietary
insulation that has a high moisture content. In addition, the Master
Lock advanced safes close airtight to offer water resistance, which
may also cause moisture to accumulate inside your safe. The desiccant
packet included in your safe during shipment should be left in your
safe. DO NOT DISCARD IT. It is intended to help absorb moisture which
may accumulate inside your safe. Please open your unit once every two
weeks to avoid moisture accumulation.
If you choose to store delicate items such as jewelry with working parts,
watches, stamps, or photos in your safe, we recommend putting them in
an air-tight container, prior to placing them in the safe for storage.
NOTE: Master Lock will not be responsible for any damage or loss of
items placed in the unit due to moisture.
Warning
DO NOT store pearls in this safe.
In the event of a fire, potential damage to delicate pearls occurs at
temperatures much lower than the 350°F (176°C) interior performance
measure which the UL classification performance standard indicated
guarantees. Therefore, DO NOT store pearls in your Master Lock product.
Warning
No computer disks, audio-visual cassettes or photo negatives.
This product is not intended to protect computer floppy or diskettes,
cartridges and tapes, audio or video cassettes or photo negatives.
Warning
Your safe is only part of your total security protection.
Master Lock recommends that you store your safe in closets, offices,
basements, bedrooms and any other locations that are convenient for
you but out of direct line of sight from prying eyes. The location of the
safe does not affect the safes ability to protect your valuables inside.
Important
If you experience any problems or challenges with your safe, please
contact us. Many issues can be resolved quickly without the product
being returned. www.masterlock.eu/safes
Mechanical Combination Lock
NOTE:
Store combination (and keys if
equipped) in a secure location
(other than in the safe).
Combination can not be
changed.
Preparing your safe for first time use
1 Ensure any shipping screws have
been removed. Located on the
inside of the door.
NOTE: Your unit may or may not
have a shipping screw.
2
M100TEST
SN100TEST01*
10-22-33 RLR
2075
Find your combination on the back
of this owner’s manual.
WARNING: Test your combination several times before
putting valuables inside.
Unlocking your safe
1 FOR DUAL KEY/COMBINATION
LOCKS ONLY, insert key into the
lock, turn to the ’unlocked’ position,
then remove the key
This is a secondary locking feature
not an override key.
2 Rotate dial to ’0’, then rotate
right (clockwise) passing ’0’
three times, continue rotating
until you reach the first number
in your combination.
3 Rotate dial to the left
(counterclockwise). Go PAST the
second number of your
combination ONCE and stop the
SECOND time the dial reaches the
number.
4 Rotate the dial to the right
(clockwise), stop when you reach
the third number in your
combination.
5 Rotate the handle downward to
open the door.
This may take a limited amount
of force if you have a water-
resistant safe.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Master Lock LTW205GYC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Master Lock LTW205GYC in the language / languages: English, Dutch as an attachment in your email.

The manual is 3.31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info