812782

Mascot MOL-CE-MI60RLDF01 - BATHROOM LED MIRROR Manual

1
Zoom out
Zoom in
Previous page
1/7
Next page
EN USER MANUAL: BATHROOM LED MIRROR
WITH DEFOG FUNCTION MOLCEMIRLDF
TABLE OF CONTENTS:
1) Package contents
2) Safety instructions
3) Installing and using the product
4) Specifications
 PACKAGE CONTENTS
• Bathroom mirror
• Set of screws
• User manual
 SAFETY INSTRUCTIONS
Always take the following precautions into consideration before using the
“Bathroom LED Mirror with Defog Function” hereinafter referred to as the
‘device’.
EXPLANATION OF USED ICONS
Remark!
Follow the instructions in the user manual!
Warning!
Warning for potential risk of death and/or serious
irreversible injury!
Warning!
Risk of electric shock. Warning for potential risk of death
and/or serious irreversible injury!
Warning!
Risk of suocation. Warning for potential risk of death
and/or serious irreversible injury!
Warning!
Risk of electric shock, overheating, fire. Do not cover the
device with cloths or curtains or any other material, as
this may cause electric shock, overheating, fire or damage
to the device. Warning for potential risk of death and/or
serious irreversible injury!
Warning!
Handle with care, fragile goods. Warning for possible
moderate or minor injuries! Warning, handle with care to
avoid breakage.
Class II
Refers to equipment where protection against electric
shock does not solely rely on basic insulation, but where
additional safety precautions like double insulation or
reinforced insulation are taken, and there is no protective
earthing or reliance upon installation conditions.
CE marking
Indicates that the product sold in Europe has been
assessed to meet high safety, health, and environmental
protection requirements.
Instructions for protecting the environment
(WEEE, the waste electrical and electronic equipment
directive)
GENERAL INFORMATION
• Read the instructions for use carefully and keep them safe. If you give
this device to other people, please also pass on this manual.
• Only use this device in accordance with the instructions in this user
manual.
• This device can be used by children aged 8 and over and people with
restricted physical, sensory or mental capacity or a lack of experience
and expertise, provided they are under supervision or have been
given instructions about safely using the device and are aware of the
potential hazards. Children must not play with the device. Cleaning and
maintenance must not be done by children unless they are over the age
of 8 and under supervision.
• Keep the device and power cord out of the reach of children below the
age of 8 years.
• This device is intended for domestic or similar use, not for professional
use.
WARNING! Do not leave packaging material lying around
carelessly. This may become dangerous playing material for
children. Risk of suocation!
WARNING! Danger because small parts may be swallowed.
The device contains small parts that could be swallowed. Keep
these parts away from children under the age of 36 months.
ELECTRICITY AND HEAT
• Prior to use, check that the mains voltage is the same as the mains
voltage stated on the name plate of the device.
• Make sure your hands are dry before touching the device, power cord
or plug.
• Plug the power plug into an electrical outlet that is easily accessible
at all times.
WARNING! Never cover the power plug, cable, electric base or
device with cloths, curtains or any other material as this may
cause electric shock, overheating, fire or damage to the device.
• Make sure that the device and power cable do not come into contact
with heat sources, like a hot hob or naked flame.
• Check the power cord regularly for damage.
• Never use the device if the power cord shows signs of damage, if the
device has fallen on the ground or shows any other signs of damage.
• Switch OFF the device and remove the power plug if you discover any
faults during use, find any signs of damage, are not using the device or
are cleaning it.
• Make sure the power cord cannot be trodden on or pinched.
• Do not allow the power cord to hang over sharp edges and keep it away
from hot objects and naked flames.
• When plugging in the power plug, make sure people cannot
accidentally pull it out or trip over it.
• Remove the power plug from the power socket during lightning storms
or if unused for long periods of time.
• When removing the plug from the power socket, pull the plug itself,
not the cable.
• Do not operate the device using an external time switch or a separate
remote control system.
• The use of an extension cord is not recommended.
USE
• Do not use the device in the vicinity of flammable materials.
• Do not leave the device unattended when it is in use.
• This device is not a toy and should be kept under strict supervision to
prevent children from using the device as a toy.
• Do not allow children to clean or maintain this device unsupervised.
• Never allow children to use domestic appliances as toys or without
supervision. Children are unable to judge the hazards associated with
incorrectly using electric appliances.
• Children and pets in the vicinity of the device must always be
supervised by an adult.
• Do not lean on the device.
• Never move the device when it is switched ON or still warm. First switch
OFF the device and only move it when it has cooled down.
• Regularly clean the device thoroughly (see “cleaning and
maintenance”).
• When in use and when stored, do not place anything else on top of
the device.
• Do not place the device in contact with and/or on or near combustible
materials.
• Avoid locations subject to vibrations, cold or humidity.
• Do not expose the device to direct sunlight, heat sources, excessive
humidity or corrosive environments.
• Only use the device indoors and not in the vicinity of water or any other
liquids.
• Do not use the device if it, the cable or power plug has fallen into water
or any kind of fluid.
• Never immerse the device, cable and power plug in water or any kind
of fluid.
• Do not pick up the device if it has fallen into water or any kind of fluid.
Remove the plug from the power socket immediately. Do not use the
device again.
• Do not place the device under any mechanical stress.
• Improper use of the device could damage the product.
• Please handle the device carefully. Impacts or falls, even from a low
height, can damage the device.
• Do not open the casing as this may result in electric shock.
• Do not attempt to disassemble or repair the device or modify it in any
manner.
• The device must be serviced if it has been damaged in any way, i.e. the
power supply cord/plug is damaged; liquid has been spilled; objects
have fallen into it; it has been exposed to rain or moisture; it has been
dropped or does not operate properly.
WARNING! Handle with care to avoid breakage. When the mirror
is broken, stop using the device.
• Do not use abrasive cleaning solvents to clean the device.
• Do not use foreign objects to clean the device.
• This device is intended for domestic purposes only, not for professional
use.
• The warranty will expire immediately if damage has been caused by
non-compliance with this user manual. The manufacturer accepts no
liability for damage caused by non-compliance with the user manual,
negligent use or use which does not comply with the conditions of this
user manual.
• The LEDs cannot be replaced.
WARNING! Do not stare at the device’s illuminated LEDs for an
extended period of time. The LEDs can cause injury or irritation
to the eyes. Do not look directly at the light source using optical
instruments that focus on light rays.
 INSTALLING AND USING THE DEVICE
Open the packaging carefully before taking out the device. Make sure
the device is complete and undamaged. If any components are missing
or damaged, contact the vendor and do not use the product. Retain the
packaging or recycle it in accordance with local regulations.
There may be production residues on the device. To avoid harmful eects,
clean the device with a damp cloth and dry thoroughly with a dry cloth.
PARTS & FEATURES OF THE DEVICE
1. Mirror
2. Defog button
3. Light button
4. LEDs
5. Wall mounting brackets
6. Power cord
7. Set of screws
8. Expanding plugs
FRONT:
1.
4.
4.
6.
5. 5.
2. 3.
BACK:
1.
4.
4.
6.
5. 5.
2. 3.
7. 8.
FIRST USE
• Remove the device and accessories from the box. Remove any stickers,
protective film or plastic from the device.
• Before using the device for the first time, clean with a damp cloth.
• Thoroughly dry the device.
• Never use aggressive or abrasive cleaning materials, a scouring
sponge or steel wool; these could damage the device.
WALL MOUNTING
Installation must only be carried out by qualified personnel. Incorrect
assembly can result in severe personal injury and damage.
If you intend to install this device yourself, you must check for installations
such as electrical wiring and plumbing that may be buried inside the wall.
The installer is responsible for verifying that the wall will safely support the
total load of the device and wall brackets.
Additional tools (not included) are required for installation.
Do not over-tighten screws.
Use an electronic stud finder to check the wall before drilling and
mounting. Ensure the wall can bear the weight of the device.
The device must be fixed to a wall by using the wall mounting brackets (5).
• Mark out where the device should be installed on the wall. Make sure
the openings are levelled and aligned.
• Drill holes into the wall, insert the expanding plugs (8) and fix the set
of screws (7).
• Mount the device by sliding the wall mounting brackets (5) onto the
screws (7).
Connecting to the mains power
• Plug the power cord into an electrical outlet that is easily accessible at
all times. Once connected to the mains power, the defog (2) and light
button (3) will light up blue and the device will be in standby mode.
• To completely power off the device, remove the power plug from the
mains power.
Using the device
LED lights
• To turn on the LED lights of the device, press the light button (3) which
lights up white.
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mascot MOL-CE-MI60RLDF01 - BATHROOM LED MIRROR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mascot MOL-CE-MI60RLDF01 - BATHROOM LED MIRROR in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3.57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info