442883

Marshall VT-1 Vibratetrem Manual

3
Zoom out
Zoom in
Previous page
1/5
Next page
2
Introduction
Of all the retro effects to hit the shops in recent years, perhaps
the most authentic and coolest is tremolo. Instantly calling up
the spirit of the 60s, Tremolo was the first effect to appear on a
Marshall amp in the early 1960s. The late 90s sees Marshall
updating the tremolo effect in the form of the Vibratrem.
By using split phase modulation a truely awesome stereo sound
field can be created by connecting the VT-1 up to two amplifiers.
The Vibratrem features a passive bypass for the main signal path
to ensure complete tonal integrity and has a quality of tone
matched only by its versatility.
Here follows a complete run down of the Vibratrem's features for
your information. We have also enclosed a number of suggested
settings to help guide you. It should be remembered though that
these are only suggested settings and you should really take the
time to experiment.
If you take the time to explore the different effects within the
Vibratrem, you won’t be disappointed.
Features
1. ‘Out 2’ Jack Socket
The Vibratrem is a stereo footpedal. If you are using the
Vibratrem in a stereo configuration this Jack socket is for your
second output.
2. ‘Out 1 - Mono’ Jack Socket
This is the main output of the Vibratrem and is for connection to
the amplifier or to another effects pedal.
3. Mode
This allows you to switch between the Vibratrem's two modes,
Vibrato and Tremolo.
Tremolo - refers to change in signal volume. In Tremolo mode
the signal increases and decreases at a role governed by the
speed control. The tremolo on the VT-1 is specially designed to
recreate the natural swell and decay of a valve-based tremolo as
found on many vintage valve amplifiers.
Vibrato - By phase shifting the effected signal with respect to
direct, uneffected signal, a subtle pitch shifting vibrato is
created. The vibrato on the VT-1 has been developed to closely
mimic the vibrato settings on certain vintage valve amplifiers.
Note: the stereo output remains unchanged (i.e. tremolo) in
vibrato mode.
Always use good quality shielded leads.
Always use 9V regulated DC supply with centre negative.
Setting Up
3
ENGLISH
Although it may seem obvious the first action in achieving a
good effected sound (be it duration / compression etc.) is to find
the perfect bypassed sound. This will then allow the correct level
to be set with the effect unit to allow a cut or boost in volume
and a realistic tone.
On clean channels it is advisable to set the gain (or volume) to a
setting of no less than one quarter maximum so as not to get
unrealistic results due to any volume dependent tonal shaping on
the amplifier preamp.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marshall VT-1 Vibratetrem at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marshall VT-1 Vibratetrem in the language / languages: English as an attachment in your email.

The manual is 0,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info