442877
5
Zoom out
Zoom in
Previous page
1/9
Next page
8100, 8080, 8240, 8280
and 8200.
8100: 100 Watt HEAD.
8080: 80 Watt COMBO.
8240: 40 Watt per side Stereo Chorus COMBO.
8280: 80 Watt per side Bi-Chorus COMBO.
8200: 100 Watt per side Bi-Chorus HEAD.
CHANNEL 1 (Normal)
1. Input Jack
Connects the guitar to the amplifier.
2. Gain Control
Controls the gain level of the normal channel on
both Clean and Crunch selections. In Clean mode,
sounds remain clean, even at high gain levels.
When switched to Crunch mode the amount of
crunch increases as you wind the gain up.
3. Clean/Crunch Rhythm Switch
Push switch to select either clean or crunch sounds
on the normal channel (push in for Crunch).
4-6. Bass, Middle & Treble
Full 3 band EQ for normal channel tonal
selections. These controls are effective and
interactive to give you incredible versatility. Try as
many combinations as possible to really get to
know your EQ.
7. Channel Select
Normal to boost channel selector switch. This
function is also footswitchable. Set the switch to
the in position for the footswitch to function.
LED’s indicate which mode has been selected.
CHANNEL 2 (Boost)
8. Gain Control
Controls the gain level of the boost channel, which
features ECC 83/12 AX7 valve drive. This control
is effective on either overdrive selection. On OD1,
it fattens the bluesy distortion and on OD2 goes
from rock overdrive to full metallic thrash as you
turn it up.
9. Overdrive Select (OD1 to OD2)
Manually switches from creamy “classic” OD1 to
screaming “Hi Gain” OD2 distortion modes.
10-12. Bass, Middle & Treble
Effective 3 band EQ to shape the tone of all
overdrive selections.
13. Contour Control
This sweeping control shifts the mid-band voicing
of the boost channel to give amazing versatility to
your overdrive sounds. When used in conjunction
with the 3 band EQ, this control is devastating!
14. Volume Control
Controlling the overall level of the boost channel,
this allows volume balancing between the two
channels.
MASTER SECTION
(8080 & 8100)
15. Effects Send Jack
For linking to the input of an external effects
processor.
16. Effects Level Switch
Selects the level to match your external effects
units (0dB for rack units and -20dB for pedals).
17. Effects Return Jack
For connection from the output of an external
effects processor.
18. Effects Mix
Allows you to mix the effects to dry signal. Note, if
no effects pocsessor in line, Effects Mix fully
clockwise will result in no signal.
19. Master Reverb
Controls the level of reverb effect on all channel
selections.
20. Master Volume
Controls the overall volume level of the amp or
combo.
21. Line Out Jack
Filtered low level signal for linking to a recording
or mixing desk.
22. Footswitch Jack
For the connection of a two way footswitch for
reverb and channel selection (Marshall footswitch
P802 included).
MASTER SECTION (8240)
The 8240 has identical features up to item 17, then
as follows.
17. Effects Returns
Jacks for connection from the left and right outputs
of an external stereo effects processor (left return
also acts as the return for a mono effects processor
if used).
18. Effects Mix
For mixing the effects to dry signal. Note - if no
effects processor in line, Effects Mix fully
clockwise will result in no signal.
19. Master Reverb
Controls the level of reverb effect on all channel
selections.
20. Chorus Depth
Controls the modulation depth of the built-in
chorus effect.
5
VALVESTATE HANDBOOK ART english 1/11/04 10:23 am Page 5
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marshall Valvestate 1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marshall Valvestate 1 in the language / languages: English as an attachment in your email.

The manual is 0,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info