705256
6
Zoom out
Zoom in
Previous page
1/6
Next page
7. Channel B output impedance select 16 Ohm or
8 Ohm - it is important that your amplifier and loudspeaker
load are correctly matched.
Note!
If 4 Ohm output is desired please consult your
authorised Marshall agent.
8. Channel A output impedance select
(See 7 for notes).
9. Channel A loudspeaker jacks
(See 6 for notes).
10,11. Remote voicing switching jacks
10 operates on channel B, 11 operates on channel A.
Short to ground function. Using jack 11 only links
channel A & B switching functions for simultaneous use.
12. Channel B link out jack
Connects channel B
input signal to further power amp inputs.
13. Channel B input jack
Accepts input from pre-
amp.
14. Channel A input jack
Accepts input from pre-
amp.
Note!
Using 14 only connects input signal to both
channels A & B for parallel mono operation.
15. Channel A link out jack
Connects channel A
input signal to further power amp inputs.
Valve Location Guide
ENGLISH
6
Rear Mounting Fixing Hole
FRONT
OUTPUT
TRANSFORMER
OUTPUT
TRANSFORMER
EL34
EL34
EL34 EL34
EL34EL34EL34EL34
Rear Mounting Fixing Hole
ECC81
12AT7
ECC83
12AX7
ECC83
12AX7
ECC81
12AT7
Not Fitted To EL34 50/50
MAINS
TRANSFORMER
MAINS
TRANSFORMER
Parameter EL34 50/50 EL34 100/100 Notes
Size 19" 3U x 331mm deep 19" 3U x 331mm deep The unit must be supported at
the rear when mounted in a rack
Weight 29.5 kg 34.5 kg
Power input 350 watts 700 watts
Voltage Input 115V or 230V 115V or 230V Consult amp rating plate or dealer
Frequency 50 or 60 Hz 50 or 60 Hz Consult amp rating plate or dealer
Mains fuses T3.15A/115V T4A/115V Per channel
T1.6A/230V T2A/230V Per channel
H.T. Fuses T315 mA T1A Per channel
Output Power 50W RMS 100W RMS At clipping (per channel)
Output Impedance 8 or 16 Ohm* 8 or 16 Ohm* Consult dealer for 4 Ohm
Input sensitivity OdB OdB
Input impedance 20K 20K
Output valve 2 x EL34 4 x EL34 Per channel
Phase inverter 1 x ECC81/12 AT7 1 x ECC81/12 AT7 Per channel
Pre Driver 1 x ECC83/12 AX7 1 x ECC83/12 AX7 Per channel
Specification Chart
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marshall EL34 100-100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marshall EL34 100-100 in the language / languages: English as an attachment in your email.

The manual is 0,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info