705377
5
Zoom out
Zoom in
Previous page
1/8
Next page
ENGLISH
9
10 11 12 13
DSL5C Rear Panel Features (from Left to Right)
42 3
5
6
7
1
8
1. MAINS INPUT SOCKET WITH MAINS FUSE
Your amp is provided with a detachable mains
(power) lead, which is connected here. The specifi c
mains input voltage rating that your amplifi er has
been manufactured for is indicated on the rear panel.
Before connecting for the fi rst time, please ensure
that your amplifi er is compatible with your electricity
supply. If you have any doubt, please seek advice
from a qualifi ed technician. Your Marshall dealer will
help you in this respect.
FX LOOP
–––––––––––––––––––––––––––––––––––––––––
2. FX LOOP SEND
For connection to the input of an external effects
pedal or processor.
3. FX LOOP RETURN
For connection from the output of an external effects
pedal or processor.
FOOTSWITCH
–––––––––––––––––––––––––––––––––––––
4. FOOTSWITCH JACK
For the connection of the supplied footswitch. This
allows you to switch between the Classic Gain and
Ultra Gain channels.
NOTE: The footswitch overrides the front panel
Channel switch.
5. EMULATED LINE OUT
A speaker emulated output for connection to a
recording console, live PA, or headphones. When the
Power switch (5) is set to High power, this jack operates
as a line output. When the power switch is set to Low,
the jack operates as a headphone output. Plugging in
headphones to this jack when the power switch is set to
low, will mute the speaker for private practice.
6. AUDIO
Enables the connection of an MP3 player or any similar
source for practicing BUT ONLY when the amp is in
headphone mode (Low Power). The signals are mixed
using a HiFi mixer for high-quality, backing-track audio
quality - this does not effect the tone of the guitar signal.
IMPORTANT NOTE: The Audio in input is not
connected to the speaker - just the headphone out.
7. HIGH/LOW POWER MODE SWITCH
Switches the output power of the amplifi er from 5W
(High) to approximately 0.5W (Low). It also effects
the operation of the Emulated Line Out/Emulated
Headphone Out (3) as already indicated.
LOUDSPEAKER OUTPUTS
–––––––––––––––––––––––––
IMPORTANT OPERATIONAL NOTE: With all-valve
amplifi ers it is imperative that the amp is connected
to a load whilst in operation and that the impedance
output on the amp matches the total impedance of the
speaker cabinet being used.
Failure to comply with these points will result in
damage to the amplifi er.
8. 16Ω SPEAKER OUTPUT
For the connection of the internal speaker or an
external 16Ω speaker cabinet.
IMPORTANT OPERATIONAL NOTE: The internal
speaker is 16Ω.
4
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marshall DSL5C - 2012 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marshall DSL5C - 2012 in the language / languages: English as an attachment in your email.

The manual is 1,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info