705279
6
Zoom out
Zoom in
Previous page
1/7
Next page
emulation. This ensures that your
headphone and output signal from this
socket provide the best possible tone for
practice or recording.
Note: For silent recording via EMULATED
OUT set the OUTPUT switch to STB (Front
Panel Function #14).
Important: Using EMULATED OUT does
not omit the need for a speaker load to be
connected (See Rear Panel Function #22).
22. LOUDSPEAKERS
There are three speaker cabinet output
jack sockets available. They are labelled
according to the intended impedances:
1 x 16 OHM: Connect a single 16
Ohm speaker cabinet to this jack.
1 x 8 OHM or 2 x 16 OHM: Connect
a single 8 Ohm speaker cabinet or
two 16 Ohm speaker cabinets.
WARNING - Although the amplier has
three speaker outputs, never attempt
to connect more speaker cabinets than
rated. The safe combinations are: 1 x 8
Ohm speaker cabinet, 2 x16 Ohm speaker
cabinets or 1 x 16 Ohm speaker cabinet.
Any other speaker cabinet conguration
may stress the power amplier section and
in extreme cases may lead to valve and/
or output transformer failure. NEVER use
DSL20HR or DSL20CR without a speaker
load.
16. MAINS INPUT
Connects the amplier to the mains
electricity supply.
Note: The MAINS INPUT socket has an
integrated fuse compartment. Ensure that
the value of a replacement fuse matches the
labelling on the amplier rear panel. You
MUST ALWAYS switch the amplier OFF
and disconnect it from the mains electricity
supply before attempting to access the fuse
compartment. If in doubt, contact your
Marshall dealer.
17. FX LOOP RETURN
Connect the output of an external FX
pedal or processor.
18. FX LOOP SEND
Connect the input of an external FX
pedal or processor.
19. F/S
Connect the supplied 2-way CHANNEL
and FX LOOP footswitch here (PEDL-
90012).
20. AUDIO IN
Connect an external device here for
practice or to jam along with music.
21. EMULATED OUT
Frequency compensated line level
output for headphones or for connection
to a mixer. The DSL is equipped with
a high quality emulated output using
Softube-designed studio cabinet
REAR PANEL FUNCTIONS
DSL20CR REAR PANEL
DSL20HR REAR PANEL
ENGLISH
16
16 17 18 19 20 21
22
171819202122
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marshall DSL20HR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marshall DSL20HR in the language / languages: English as an attachment in your email.

The manual is 2,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info