705281
35
Zoom out
Zoom in
Previous page
1/38
Next page
前面板功能(续上)
简体中文
EQUALISATION SECTION(均衡部分)
10.TREBLE(高音)控制器
控制您声音中的高频含量。顺时针方向
旋转将增加高频成分,使声音更清脆、
明亮。
11.MIDDLE(中音)控制器
控制您声音中的中频。顺时针方向旋转
将增加声音的宽广度。逆时针方向旋转
将减少中频成分,使声音变得更厚重
配合 Tone Shi(音量切换)按钮(前面
板第 13 项功能)使用时效果更明显。
12.BASS(低音)控制器
控制您声音中的低频量或低频部分。顺
时针方向旋转将增加低频成分,使声音
更饱满。
13.TONE SHIFT(音色切换)按钮
TONE SHIFT(音色切换)按钮用于重新
配置前置放大器均衡网络,为音色的塑
造增加一个新的维度。
音色说明:前置放大器 EQ 网络是一个
相互之间密切联系的动态网络。因此
需要注意的是,改变任何一个控制器的
设置都可能会改变其他控制器的工作方
您需要通过反复试验找出最适合您
的声音。
14.PRESENCE(临场)控制器
控制您声音中的高频量。顺时针方向旋
转使声音更清脆、尖锐。PRESENCE
(临场)是一项独立于前置放大器 EQ
制器的功率级功能。
15.RESONANCE(共振)控制器
控制您声音中的低频量。顺时针方向
旋转此控制器将添加一个共振低音增
强。RESONANCE(共振)是一项独立
于前置放大器 EQ 网络的功率级功能。
REVERB SECTION(混响部分)
16.REVERB CLASSIC(混响经典增益)控制器
控制 CLASSIC GAIN(经典增益)通道
的混响水平。
17.REVERB ULTRA(混响超增益)控制器
控制 ULTRA GAIN(超增益)通道的混
响水平。
MASTER VOLUME SECTION(主音量部分)
18.MASTER SELECT(主音量选择)开关
此开关在 MASTER 1(主音量 1)和
MASTER 2(主音量 2)之间切换。
注:您可以使用可选的 6 PEDL-91005
脚踏开关在 MASTER 1(主音量 1)和
(主音量 2)之间切换。
19.MASTER 1(主音量 1
选择后,控制放大器的总音量水平。
20.MASTER STATUS LED(主音量状态 LED
指示灯)
LED 指示灯亮绿色表示选择了 MASTER 1
(主音量 1),亮红色表示选择了
MASTER 2(主音量 2)。
21.MASTER 2(主音量 1
选择后,控制放大器的总音量水平。
22.LOOP STATUS LED(回路状态 LED 指示
灯)
LED 指示灯亮红色表示开启了 FX
LOOP(效果回路)。FX LOOP(效果回
路)关闭时此灯熄灭。
23.LOOP ON/OFF(回路开关)
此开关用于激活和停用效果回路。
注:效果回路开关可使用随机附带的 2
路脚踏开关或可选的 6 路脚踏开关进行
控制。
简体中文
前面板功能(续上)
DSL100HR DSL40CR 配有一个用于选
择通道和开、关效果回路的 2 路脚踏开关
(PEDL-90012)
另外您还可以选择一个 6 路脚踏开关
(PEDL-91016),以便在演奏期间完全控制
您的 DSL100HR DSL40CR
您可以选择各种模式:CLEAN(清音)、
CRUNCHOD1(过载 1)或 OD2(过
2),选择 MASTER 1(主音量 1)或
MASTER 2(主音量 2),以及开、关 FX
LOOP(效果回路)。
使用 DSL 脚踏开关进行切换
24.OUTPUT(输出)开关
此三位置摇杆开关组合了 STB(待机)
HIGH/LOW(高/低)输出功率功
能。本放大器的输出级和功率控制器可
以在所有功率级别提供最佳的音色表
现。HIGH(高)和 LOW(低)输出功
能允许用户在内部电源的两种配置之间
进行选择。这两种配置提供了两个输出
功率水平选项,但请确保输出电子管在
两种模式下的工作方式相同。这表示,
放大器可以在不影响音色的情况下切换
LOW(低)功率模式。
HIGH(高):对于 DSL100HR,此设置
100 瓦,对于 DSL40CR,此设置为
40 瓦。
STB(待机): POWER(电源)开关
(前面板第 25 项功能)组合使用。通电
时,请务必先打开 POWER(电源)开
关,让 OUTPUT(输出)开关处于 STB
待机)位置。此外,在演奏休息期间,
还应通过待机模式使放大器静音,以免
放大器的电子管负载过高。
LOW(低):对于 DSL100HR,此设置
50 瓦;对于 DSL40CR,此为 20 瓦。
25.POWER(电源)开关
电源开关。
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marshall DSL100HR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marshall DSL100HR in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 8,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info