705292
60
Zoom out
Zoom in
Previous page
1/62
Next page
简体中文
吉他调音表
同时按下前置效果器 (PRE FX) 和前置放大器 (AMP) 分段开关(本手册中的第 15 16 项)
以访问吉他调音表:
拨动一根弦线,显示屏上将显示您弹奏的音符。
调整弦线的音调,直至您想要调谐的音符出现在屏幕上。
如果音符平坦,条形将向左移动。如果音符突兀,条形将向右移动。
当条形位于正中心时,该弦线即已调整至与显示的音符匹配。
退出/存储”(EXIT/STORE) 退出调音表。
恢复出厂设置
恢复出厂设置会使 CODE 的预设返回新出厂时的状态。
如需恢复出厂设置,请:
使用电源开关(本手册中的第 14 项)关闭放大器的电源。
按住前置放大器 (AMP) 分段开关的同时,打开电源。
屏幕上将显示放大器即将恢复出厂设置的通知。
如果您确定要恢复出厂设置,请按住退出/储存”(EXIT/STORE) 开关不放确认(本手册
中的第 22 项)。
如果您不想恢复出厂设置,则按任意其他开关将取消恢复出厂设置的操作,然后按正常
情况启动放大器。
A:>>|<<
A:>>|<<
A:>>|<<
恢复出厂设置前,请确定您想要覆盖您的所有个人预设。
!
简体中文
蓝牙
同时按下混响效果器 (REV) 和功率 (POWER) 分段开关(本手册中的第 19 20 项)以开
Bluetooth
®
配对功能:
显示屏将显示‘Bluetooth:’以及 CODE 放大器的配对码。
在配对过程中,退出/储存”(EXIT/STORE)(本手册中的第 22 项)上的蓝色 LED 指示
灯将闪烁。
配对后,蓝色 LED 指示灯将停止闪烁,并持续发亮。
载入音频流时,请使用主音量 (MASTER) 控制器或您的音乐播放器来设置音量。
使用 Marshall Gateway™ 应用程序,您可以通过 iOS Android 设备远程控制您的 CODE
放大器。创建 Marshall Cloud 配置文件并同步您的设备以在线管理您的预设库。您可以共
享您的预设、访问特色预设、在 CODE 论坛加入谈话等。在 my.marshall.com 注册并成
CODE 在线社区的一部分。现在就从 App Store Google Play 下载 Marshall Gate-
way
除了主音量 (MASTER) 外,音频流不受 CODE 面板上的特性影响。
!
储存预设(续上)
前置效果器
前置放大器 (AMP)
调制效果器 (MOD)
延迟效果器 (DEL)
混响效果器 (REV)
功率 (POWER)
音箱 (CAB)
清除
编号
大写/小写 A
大写/小写
空格
退格
取消
命名快捷方式
如需完成储存过程,请再次安装退出/储存”(EXIT/STORE) 不放,直至屏幕上显示
STORED(已储存)。此时您编辑后的预设已储存到 CODE 的内存。
分段开关可用作命名的快捷方式:
60


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marshall Code 100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marshall Code 100 in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 13,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info