442739

Marshall Audiostate Manual

8
Zoom out
Zoom in
Previous page
1/11
Next page
7
1, 5, 7, 8 & 9. Line Input Jack
This is a high impedance unbalanced input for
channels 1, 2, 3, 4 & 5 respectively. Typical uses
of line jack type inputs are drum machines and
keyboards.
2. Mic Input XLR - Channel 1
This is a low impedance balanced input for use
with microphones.
3. Effects Send Jack
For connection to the input of an external effects
processor. For use on Channel 1 only.
4. Effects Return Jack
For connection to the output of an external effects
processor. For use on Channel 1 only.
6. Mic Input XLR - Channel 2
This is a low impedance balanced input for use
with microphones.
10. Line Inputs Phono
These are high impedance unbalanced inputs.
Typical uses of Line, phono type inputs are drum
machines, C.D. players, tape deck, 4 tracks and
computers.
11. Line Out Phono
The Line Out can be used for connection to
recording equipment for direct recording or for
connection to a P.A. system. This is not affected
by the Master Volume.
12. Send Jack
For connection to the input of an external effects
processor.
13. Return Jack
For connection to the output of an external effects
processor.
14. Remote Footswitch
Allows you to switch internal reverb on and off
from remote footswitch,
(optional extra, model no. PEDL-00020).
15. Power
Switches the mains power to the combo.
16. Mains Input
For connection to the mains. We would always
recommend that your plug is wired in accordance
with your country’s regulations.
LR300 Rear Panel Features (page 40)
ENGLISH
28. Effect Return
This is the master Effects Return and is an effects
mix control, allowing you to decide when using
an external effects processor how much of your
overall sound will be effected. Further control is
given by the individual Effect control which
features on each channel.
29. Master Reverb
The LR300 comes complete with an in-built
spring reverb. The overall reverb level for the
combo is set here, with independent controls
featuring on each channel allowing you to set
independent levels for each channel.
30. Master Volume
The overall volume of the combo is set here. As
with effects and reverb, there is an independent
control on each channel allowing you to set
independent volume levels for each channel.
This will not however affect the level of the Line
Out Phono on the rear panel (item 11).
31. LED
Indicates operating status of combo.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marshall Audiostate at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marshall Audiostate in the language / languages: English as an attachment in your email.

The manual is 0,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info