161820
30
Zoom out
Zoom in
Previous page
1/31
Next page
Menu button function :
For the Menu button and there have many function include and you need to press the Menu button once and the display will show
“ RECORD” Then press the SKP + button and the display will show other function mode the details as follows :
Press the Menu button once the display will show RECORD
Press the SKIP + button Once and the display will show CLOCK
Press the SKIP + button Twice and the display will show TIMER
Press the SKIP + button again and the display will show EQ
Press the SKIP + button again and the display will show ID3
When you Press the Menu button then you want to go to which mode and you need to press PLAY/PAUSE Button to confirm and enter
that mode.
- RECORD MODE : Press the Menu button once and the display will show RECORD and press PLAY/PAUSE button and the display
will show REC USB, that means you need to record the song form USB?, if yes, press PLAY/PAUSE button to confirm it. If you
want to record the song to SD or MMC card, press the SKIP+ button and the display will show REC CARD, press Play/Pause button
to confirm it. Then when you record the songs, then will record to Card.
- CLOCK MODE : Press the Menu button once and press the SKIP + button once, then the display will show CLOCK, press the
Play/Pause button to confirm and the display will show the 00:00 and the hours 00 will sparking and press the SKIP+/- to select the
hour time, press Play/Pause button to confirm, then the min. 00 will sparking and press the SKIP +/- to select the min. time, press
Play/Pause button to confirm. Then the Clock setting is completed.
- TIMER : Press the Menu button Once and Press the SKIP + button twice, then the display will show TIMER, press the Play/Pause
button to confirm and the display will show “ON TIME”, Press the SKIP + again and the display will show OFF TIME, press again,
the display show SOUCRE, press again the display will show VOLUME
a). ON TIME: Set the time when you want the unit ON
b). OFF TIME : Set the time when you want the unit OFF
c). SOURCE : Set the unit in which mode to ON, the display will show TUNER / PRE REC / DISC / USB / CARD
d). VOLUME : Set the unit in which volume to ON the unit.
- EQ : Press the Menu button once and press the SKIP+ button third times, then the display will show EQ, press Play/Pause button
to confirm. Then the display will show FLAT -> ROCK-> CLASSIC-> JAZZ -> POP, when you want to which mode and press
Play/Pause to confirm.
- ID3 – Press the Menu button once and press the SKIP+ button 4
th
times, then the display will show ID3, press the Play/Pause
button to confirm, then the display will show ID3 ON or ID3 OFF, you can set the unit in ID3 ON OR OFF situation.
Exchange Stylus
1. Lift the tone arm.
2. Pull the old stylus carefully off while holding the pick-up system with the other hand.
3. Replace the new stylus and push carefully until it clicks in place (hold on the outside to avoid damage).
GB-10
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marquant mtt 02 usb at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marquant mtt 02 usb in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 2,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info