498516

Marquant MPR88 Manual

2
Zoom out
Zoom in
Previous page
1/10
Next page
IMPORTANT
Make sure that function is set to TAPE before connecting
the AC cord or inserting batteries.
CAUTION
Use only the supplied AC cord. Use with other cords may
result in the risk of fire.
Using on batteries
Open the lid of the battery compartment on the rear and
C POWER SUPPLY
The batteries need to be replaced when:
The tape speed slows down, volume decreases, or
sound is distorted during operation.
notes on batteries
Do not mix different types of batteries or old batteries
with new ones.
Never recharge the batteries, apply heat to them or
take them apart.
Remove dead batteries.
If liquid leaks from the batteries, wipe thoroughly to remove.
D MAINTENANCE
To clean the cabinet
Use a soft cloth lightly moistened with mild detergent
solution. Do not use strong solvents such as alcohol.
benzine or thinner.
To clean the heads and tape paths
After every 10 hours of use, clean the Recording heads
and Playback head , the pinch roller and capstan .Use
a cotton swab 5 slightly moistened with cleaning fluid
or denatured alcohol.
Cassette tapes
To prevent accidental erasure, bread off the plastic tabs
on the cassette tape after recording with a screwdriver
or other pointed tool.
To record on the tape again, cover the tab openings with
adhesive tape, etc.
1 Set function to CD.
2 OPEN the disc compartment and place a disc with
the printed side up. The total number of tracks
is displayed.
3 Press PLAY/PAUSE to start play- the indicator
lights up:
The number of the track being played is displayed.
4 Turn VOLUME to adjust the sound.
STOP - Stops play.
PLAY/PAUSE - Pauses play. To resume play, press
again.
SKIP/SEARCH - Searches for a particular
point during playback. Keep or pressed and then
release it.
- Skips to the beginning of a track. Press or
repeatedly
E CD OPERATION
,
REPEAT
Press REPEAT once- the indicator lights up:
A single track is played repeatedly. Select a track
with or .
Press REPEAT twice- the indicator lights up:
All tracks are played repeatedly.
PROGRAM
In stop state, press PROGRAM, the indicator lights up,
and use skip/search to select the track. Will be program,
press play to start program play.
NOTE
Do not use irregular shape CDs(example: heart-shaped,
octagonal ones). It may result in malfunctions.
Do not place more than one disc in the disc
compartment.
Do not try to open the disc compartment during play.
Do not touch the lens. Doing so may cause malfunctions.
1 Set function to RADIO.
2 Select a band with BAND.
3 Tune to a station with TUNING.
4 Turn VOLUME to adjust the sound.
For better reception - Extend the FM antenna and orient
it for the best reception; AM antenna is inside the unit.
Position the unit for the best reception.
FM ST
Sets the FM or AM sound, insert a tape, Press rec start
recording.
F TUNER OPERATION
Use Type 1 (normal) tapes only.
PLAYING BACK A TAPE
1 Set function to TAPE.
2 Press STOP/EJECT to open the cassette
holder and insert a tape with the exposed side up and
the side to be played facing out.
3 Press PLAY to start play.
4 Turn VOLUME to adjust the sound.
STOP/EJECT - Stops play.
PAUSE - Pauses play. To resume play, press again.
F FWD/ REW - Fast forwards/rewinds. To
stop winding. press STOP/EJECT.
G TAPE OPERATION
RECORDING
Note that recording is done on only one side of the tape.
1 Insert a tape with the side to be recorded facing out.
Wind up the tape to the point where recording starts.
2 Get ready to record from the source.
To record from a CD: set function to CD and start play.
To record from the tuner: set function to RADIO and
tune to a station.
3 Press REC to start recording.
PLAY is pressed simultaneously.
To stop recording, press STOP/EJECT.
To erase a recording, set function to TAPE and start
recording.
To turn off the unit, set function to TAPE.
To listen with the headphones, connect headphones with a stereo mini plug to the PHONES jack.
If an erroneous display or malfunction occurs, disconnect the AC cord and remove all the batteries to turn off the
display. Then turn the power back on.
H GENERAL
COPYRIGHT
Please check the copyright laws relating to recordings from disc, radio or external
tape for the country in which the machine is being used.
I SPECIFICATIONS
General
Speaker: 77 mm cone type (2)
Output: Headphones jack (stereo jack)
Power output: 1.5W +1.5 W
Power requirements: DC 12 V using eight size C batteries,
AC 230V, 50Hz (15W)
Weight: 2.4Kg (excluding batteries)
Dimensions: 290(W)x160(H)x270(D) mm
Accessory: AC cord (1)
Specifications and external appearance are
subject to change without notice.
insert eight (size C) batteries, not supplied, with the and
marks correctly aligned. then close the lid.
To switch from AC power supply to battery power supply,
disconnect the AC cord from the AC inlet.
Tuner section
Frequency range: FM : 88-108 MHz
AM : 540-1600 KHz
Deck section
Track format: 4 track, 2 channels
Frequency range: Normal tape
Recording system: AC bias
Erasing system: Magnet erase
Heads: Recording / playback head
Erasure head
CD player section
Disc: Compact disc
Scanning method: Non-contact optical scanner
(semiconductor laser)
GB-3 GB-4
2 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marquant MPR88 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marquant MPR88 in the language / languages: Dutch, French as an attachment in your email.

The manual is 0,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info