487659

Marquant MCR-1302 Manual

57
Zoom out
Zoom in
Previous page
1/92
Next page
27
FONCTIONNEMENT
- Listening to Traffic Announcement
TA button is operated as follows:
When pressed short, it is engaging
whether TA mode on or off.
In any mode, when TA mode is on and
a traffic announcement is transmitted,
the unit will switch temporarily to radio
mode and play the traffic
announcement. And when finished
playing it will switch to previous state.
If the volume level was under the
threshold point it will be raised to the
threshold point. But the user changed
the volume level, which was more than
the threshold point (min.
TA volume level), it will be set to the
last level.
When TA mode is on, TA of individual
segment is turned on.
When a TP station is received, TP of
individual segment is turned on.
TA interruption function
When listening the traffic
announcement, if you press the TA
button, the traffic announcement will
be interrupted, but the TA mode is still
on. In this mode, you can press
MODE button to change mode to TA
mode and listen to traffic
announcement. Press TA button again
will stop the current traffic
announcement. And the unit will return
to its original station.
The RDS data used are the PI, PS, AF,
TP, TA, EON and PTY data.
PI: Program Identification code
Code for identifying programs
PS: Program Service Name
Broadcast station name data
expressed in alphanumerically
characters
AF: Alternative Frequencies
Frequency list of broadcasting
stations transmitting the same
program
TP: Traffic Program Identification
Identification data for traffic
information-broadcasting station
TA: Traffic Announcement
Identification
Identification data showing traffic
information is being transmitted
or not
PTY: Program Type Code
Contents of programs such as
news, light music, sports etc.
FONCTIONNEMENT AV
Basculer en mode AV
Il y a une paire de jacks AUDIO/VIDEO
INPUT à l’avant et à l’arrière de l’appareil.
Lorsque vous reliez le système audio/vidéo
à ces prise, appuyez sur le bouton MODE
de la télécommande ou sur le panneau
avant pour sélectionner le mode AV.
FONCTIONNEMENT DE LA LECTURE
USB
A l’arrière de l’appareil, il y a une prise
USB. Un pilote USB peut être connecté
par cette interface. (fonctionnement)
1) Reliez le pilote USB à l’interface USB,
l’appareil lira automatiquement les
fichiers enregistrés sur le périphérique
USB.
2) Lorsqu’un disque est présent dans la
fente, reliez le port USB à l’interface
USB, l’appareil lira le disque.
Appuyez sur le bouton
(stop) ou
(pause) de la télécommande ou sur le
bouton /MUT du panneau avant
pour entrer dans le mode STOP ou
PAUSE. Appuyez ensuite sur le bouton
GOTO pour lire le périphérique USB.
• L’appareil principal ne supporte que
les disques de mémoires USB qui
sont approuvés par Microsoft.
• Le lecteur USB MP3 n’est pas un
standard qui signifie qu’une marque
différente ou que différents modèles
ont leurs propres standards. Notre
produit ne peut donc pas supporter
tous les lecteurs MP3.
• Lorsque vous reliez un lecteur MP3
et qu’il y a une pile normale dans le
lecteur (pas une pile rechargeable),
vous devez retirez la pile du lecteur
MP3 puis connecter l’interface USB.
Sinon, la pile risque d’exploser.
• Lorsque vous êtes en mode USB,
assurez-vous de ne pas retirer le
pilote USB de l’interface USB.
… 57 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marquant MCR-1302 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marquant MCR-1302 in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 2,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info