Manual Marquant MCR-1302 (page 29 of 92) (English, Dutch, French)

487659

Zoom out

Zoom in

1/92

If it appears that your DVD unit is faulty,

first consult this checklist. It may be that

something simple has been overlooked.

Under no circumstances should you

try to repair the player yourself, as this

will invalidate the warranty. Only

qualified service personnel can remove

the cover or service this player.

NO POWER

• Check if the on/off button on the front

of the player is set to on.

• Check if AC or DC power plug of the

mains unit is properly connected.

• Check if there is power at the AC or DC

outlet.

NO PICTURE

• Check if the mode it set to proper state,

such as DVD mode, RADIO, TV, AV and

RGB mode.

• Check the video connection.

DISTORTED PICTURE

• Check the disc for fingerprints and clean

with soft cloth, wiping from centre to

edge.

• Sometimes a small amount of picture

distortion may appear. This is not a

malfunction.

THE PICTURE IS OVER DARK, OVER

BRIGHT OR HAS NO COLOR

Enter the picture setup menu (refer to the

Picture mode Adjustment above) to adjust

the corresponding item (BRIGHT,

CONTRAST, COLOR or TINT) to proper

value, then you can get an optimum

picture effect.

COMPLETELY DISTORTED PICTURE

• The disc format is not according to the

TV-set used (PAL/NTSC).

DISC DOES NOT PLAY

• Ensure the disc label is upwards.

• Clean the disc.

• Check if the disc is defective by trying

another disc.

NO SOUND

• Check audio connections.

• If using a HIFI amplifier, try another

sound source.

• Check if the volume is minimum, and

adjust the VOL+ to increase the volume

level.

NO RETURN TO START-UP SCREEN

WHEN DISC IS REMOVED

• Press POWER to turn off the unit, then

press it again to turn on the unit.

• Press Reset button on the front of the

DVD unit.

THE PLAYER DOES NOT RESPOND TO

THE REMOTE CONTROL

• Aim the remote control directly at the

sensor on the front of the player.

• Avoid all obstacles which may interfere

with the signal path.

• Inspect or replace the remote control

batteries.

NO AUDIO AT DIGITAL OUTPUT

• Check the digital connections

• Check the Digital Audio menu to make

sure that the digital output is correctly

set.

• Check if the audio format of the selected

audio language matches your receiver’s

capabilities.

BUTTONS DO NOT WORK

• Turn the player off and on with the power

on/off button on the front of the player.

• Press Reset button on the front of the

DVD unit.

TROUBLE SHOOTING

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Marquant MCR-1302 in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 2,03 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Marquant MCR-1302 Manual

Product: