487659

Marquant MCR-1302 Manual

25
Zoom out
Zoom in
Previous page
1/92
Next page
25
OPERATION
Local setting for reception of strong
Station, and a distant setting for
reception of weaker stations.
When search station in LOC mode, if
there is no station available, it will switch
to DIS mode and search station
automatically. If there is no station
available too it will stop searching and
return to LOC mode.
When search station in DIS mode, if
there is no station available, it will stop
searching in DIS mode.
RDS (RADIO DATA SYSTEM) OPERATION
In FM mode (refer to the upper picture),
tap RDS bar will enter RDS setting
interface like followed:
- Setting AF function
Shortly press AF button on the front
panel or tap AF bar on the screen and
release immediately to switch on or
off AF function. In AF on mode, “AF”
will flash on the screen.
- Regional Program Operation
Press and hold AF button on the
front panel for several seconds or tap
REG bar on the screen to switch on/off
region mode. In region on mode,
“REG” will be displayed on the screen.
Some broadcasting stations change
their program from normal
broadcasting to regional broadcasting
for a certain time period. When region
is on, the
current listening program remains
unchanged. When region is off, it
allows the reception moves to the
regional station.
- Using PTY to Select Program
Tap PTY bar on the screen you will
see the following interface:
Use
/ on the remote control or /
on the front panel to select the items
among:
ALARM, NEWS, AFFAIRS, INFO,
SPORT, EDUCATE, DRAMA,
CULTURE, SCIENCE, VARIED,
POP M, ROCK M, EASY M, LIGHT M,
CLASSICS, OTHER M,
WEATHER, FINANCE, CHILDREN,
SOCIAL, RELIGION, PHONE IN,
TRAVEL, LEISURE, JAZZ,
COUNTRY, NATION M,
OLDIES, FOLK M,DOCUMENT, TEST
For example, if you select “CULTURE”
this item, and then exit
PTY setting, the unit will search
whether there is the “CULTURE”
program. If there is a culture program,
the unit will change to the station
automatically. If there isn’t, “Pty: NO
PTY” will appear on the screen.
- Listening to Traffic Announcement
TA button is operated as follows:
When pressed short, it is engaging
whether TA mode on or off.
In any mode, when TA mode is on and
a traffic announcement is transmitted,
the unit will switch temporarily to radio
mode and play the traffic
announcement. And when finished
playing it will switch to previous state.
If the volume level was under the
threshold point it will be raised to the
threshold point. But the user changed
the volume level, which was more than
the threshold point (min.
TA volume level), it will be set to the
last level.
When TA mode is on, TA of individual
segment is turned on.
When a TP station is received, TP of
individual segment is turned on.
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marquant MCR-1302 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marquant MCR-1302 in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 2,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info