494325
9
Zoom out
Zoom in
Previous page
1/11
Next page
X-10 protocol for the Marmitek XM10 OEM Controller
Technical data
Supply voltage: 230V +10% -15% 50 Hz
Ambient temperature: - 10° C to + 40° C (operation)
- 20° C to + 70° C (storage)
DC characteristics:
Serial data input:
Min. logic «1»: 4 V input will sink approx 2,5 mA
Max. logic «1»: 20 V input will sink approx 18 mA
Max. logic «0»: 0.8 V will sink approx 0,1 mA
(Voltages and currents with respect to terminal 2)
Note: this output is an open collector transistor. Therefore, the
logic «1» voltage is quoted as a reference for defining the
output leakage current. An output pullup resistor is required
to generate a logic level. The pullup can be returned to any
voltage up to 20 V with respect to terminal 2.
AC characteristics:
HF output to AC power line: 60 mW average into 5W
Conforms to Class 116 of EN50065-1: load (2,5 V pk-pk instant.)
Carrier frequency: 120 kHz ± 2 kHz
Max. phase delay betwen 0 crossing
point of AC power line and 0 crossing
detect output (either transition): 100 msec
Max. allowable delay between
transitions on 0 crossing detect output
and serial data input «0» - «1»
transition: 50 msec
Max. delay betwen serial input envelope
«0» - «1» transition and carrier burst
reaching 90 %: 50 msec
Width of X10 enveloppe : 1 ms +100 msec -50msec
Isolation voltage : 4 kV rms 50Hz for 1 min.
- 9 -
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marmitek XM10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek XM10 in the language / languages: English as an attachment in your email.

The manual is 0,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info