494337
1
Zoom out
Zoom in
Previous page
1/2
Next page
3 4 52
Wanneer er in het pand bijvoorbeeld zware machines aanwezig
zijn, dan kunnen de Marmitek X-10 signalen sterk gedempt
worden door de elektrische eigenschappen daarvan. Als de
werking van Marmitek X-10 hierdoor beïnvloed wordt kan het
sperfilter tussen het lichtnet en de machine worden geplaatst
om demping van het Marmitek X-10 signaal te voorkomen, zie
schema 2.
Installatie
Maak de installatie spanningsloos alvorens het
sperfilter te installeren!
Het sperfilter is kortsluitvast tot 10 kA en dient
beveiligd te worden door maximaal een 40 A
installatieautomaat met D-karakteristiek of een
35 A patroon.
!
!
Technische gegevens
Voedingsspanning 230 V, 50 Hz
Maximum stroom 40 A
Eigenschappen
Filtert Marmitek X-10 signalen van het lichtnet om te
voorkomen dat die signalen het pand inkomen of verlaten
Kan toegepast worden om apparaten die Marmitek X-10
signalen storen van het lichtnet te ontkoppelen
Toepassingsmogelijkheden
Elke installatie voorzien van het Marmitek X-10
huisautomatiseringssysteem moet worden voorzien van het
sperfilter SFX 40 om te voorkomen dat Marmitek X-10 signalen
buiten het pand treden en om te voorkomen dat mogelijk andere
”stoor”signalen van buiten het Marmitek X-10 systeem kunnen
beinvloeden.
Door de plaatsing van het filter in het Marmitek X-10 systeem
wordt aan alle EMC eisen voldaan.
Sperfilters kunnen direct achter de hoofdschakelaar van de
installatie worden geplaatst. Voor het aansluiten van het sper -
filter dient fase (L) en nul (N) beschikbaar te zijn, zie schema 1.
kWh
kWh
L
L1
L2
L3
N
N
1- fase systeem 3- fasen systeem
L N
L N
L N
L N
L N
L N
L N
L N
Schema 1.
If the building houses heavy machinery, for example, their
electrical properties may have a dampening effect on the
Marmitek X-10 signals. If the operation of Marmitek X-10 is
affected, the suppression filter can be installed between the
lighting network and the machine to prevent dampening of the
signal, see diagram 2.
Installation
Always disconnect the power supply before
installing the suppression filter!
The suppression filter is short-circuit proof up
to 10 kA and must be protected by a maximum
40 A automatic fuse with D characteristic or a
35 A fuse link.
!
!
Technical data
Supply voltage 230 V, 50 Hz
Maximum current 40 A
Properties
Filters Marmitek X-10 signals transmitted via the lighting
network to prevent them from entering or leaving the building
Can be used to disconnect equipment that interferes with
Marmitek X-10 signals from the lighting network
Applications
Installations equipped with a Marmitek X-10 home automation
system must be fitted with an SFX 40 suppression filter to
prevent Marmitek X-10 signals from leaving the building and to
prevent signals from outside affecting the Marmitek X-10
system.
Installation of the filter in the Marmitek X-10 system ensures
compliance with all EMC requirements.
Suppression filters can be installed immediately behind the main
switch of the installation. To connect a suppression filter,
phase (L) and neutral (N) need to be available, see diagram 1.
kWh
kWh
L
L1
L2
L3
N
N
1 phase system 3 phase system
L N
L N
L N
L N
L N
L N
L N
L N
Diagram 1.
Schema 2.
L
L1
L2
L3
N
N
1- fase systeem 3- fasen systeem
L N
L N
L N
L N
L N
L N
L N
L N
M
M
Diagram 2.
L
L1
L2
L3
N
N
1 phase system 3 phase system
L N
L N
L N
L N
L N
L N
L N
L N
M
M
Marmitek X-10 Sperfilter type SFX 40
Marmitek X-10 Suppression filter type SFX 40
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marmitek SFX40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek SFX40 in the language / languages: English, Dutch as an attachment in your email.

The manual is 0,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info