494332
1
Zoom out
Zoom in
Previous page
1/2
Next page
3 4 52
Aansluitschema
Marmitek X-10 Schakelactor 16 A, modulair type SAX4
Technische gegevens
Voedingsspanning: 230 V 50 Hz
Opgenomen stroom: < 0,02 W
Schakelvermogen: 3600 W ohmse belastingen
700 W inductief / capacitief
Connectoren: Schroefconnectoren voor fase, nul en
geschakelde fase (sturing)
Eigenschappen
Schakelaar voor montage op hoedprofiel.
Schakelt belastingen tot 3600 W.
Kan op afstand geschakeld worden met:
schakelaars, impulsdrukkers, en met behulp van Marmitek
X-10 commando’s over het lichtnet.
Reageert op Marmitek X-10 commando’s ‘’Aan’’, ‘’Uit’’ en
‘’All Units Off’’.
Statusaanduiding met led.
Op de schakelactor is een keuze-schakelaar aanwezig die
ingesteld kan worden voor continu aan, continu uit, en
schakelen / besturen op afstand.
De aan de schakelactor verbonden schakelaars mogen niet
voorzien zijn van een in serie opgenomen indicatielampje.
Instellen van het Marmitek X-10 adres
Door het verdraaien van draaischakelaars aan de voorzijde van
de schakelactor, kunt u de gewenste lettercode (A t/m P) en
cijfercode (1 t/m 16) instellen.
Beschrijving van de keuze-schakelaar
Positie 0
De aangesloten belasting is uitgeschakeld, en kan niet worden
ingeschakeld door het gebruik van de aangesloten wand -
schakelaars of door Marmitek X-10 commando’s.
Positie 1
De aangesloten belasting is ingeschakeld, en kan niet worden
uitgeschakeld door het gebruik van de aangesloten wand -
schakelaars of door Marmitek X-10 commando’s.
Positie Auto
De aangesloten belasting kan in- en uitgeschakeld worden door
het gebruik van de aangesloten wandschakelaars of door
aansturing met Marmitek X-10 commando’s over het lichtnet.
Behalve comfort kan automatisch schakelen ook
gevaar met zich meebrengen. Zo kunnen anderen
verrast worden, of kan kleding welke over een
elek trische warmtebron hangt in brand raken.
Wees hier altijd op bedacht en neem afdoende
maatregelen ter voorkoming.
!
Lamp of
apparaat
Impulsdrukker
Schakelaar
auto
L
1
L
N
2
L
N
o
I
Wiring diagram
Marmitek X-10 Switch actuator 16 A, modular type SAX4
Technical data
Supply voltage: 230 V, 50Hz
Current consumption: < 0,02 W
Switch capacity: 3600 W ohmic loads
700 W inductive/capacitive
Connectors: Screw connectors for phase, neutral and
switched phase (control)
Properties
Switch for mounting on top-hat rail.
Switches loads up to 3600 W.
Can be switched remotely using switches, toggle pulse
switches and using Marmitek X-10 commands via the lighting
network.
Reacts to Marmitek X-10 commands ''On'', ''Off'' and ''
All Units Off''.
LED status indication.
The switch actuator is equipped with a selection switch,
which can be set to always on, always off and remote
switching/control.
Switches connected to the switch actuator must not be
connected in series with an indicator lamp.
Setting the Marmitek X-10 address
Turn the rotary switches at the front of the switch actuator to
set the desired letter code (A to P) and number code (1 to 16).
Description of the selection switch
Position 0
The connected load is switched off and cannot be activated via
the connected wall switches or Marmitek X-10 commands.
Position 1
The connected load is switched on and cannot be switched off
via the connected wall switches or Marmitek X-10 commands.
Position Auto
The connected load can be switched on and off via the
connected wall switches or by using Marmitek X-10 control
commands via the lighting network.
Note
Automatic switching does not just increase the
level of comfort, a number of hazards are also
involved. People may be surprised, or clothing
placed over an electrical heat source may ignite.
Always be aware of these hazards and take the
necessary precautions.
!
Lamp or
transformer
Toggle pulse switches
Switch
auto
L
1
L
N
2
L
N
o
I
Afmetingen
Dimensions
schakelactor
SAX4
9
13
1
3
5
711
15
A
I
E
M
C
G
K
O
L
1
L
N
2
80
65
35
16 A
auto
schakelactor
SAX4
9
13
1
3
5
711
15
A
I
E
M
C
G
K
O
L
1
L
N
2
80
65
35
16 A
auto
1


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marmitek SAX4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek SAX4 in the language / languages: English, Dutch as an attachment in your email.

The manual is 0,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info