494327
6
Zoom out
Zoom in
Previous page
1/8
Next page
31
Connecting of the power cord.
32
Standard mode or toggle mode
The IRIX35 can run in the standard mode or the toggle mode.
Standard mode
In standard mode the IRIX35 is compatible with existing
X10 IR-transceivers. The user must press separately the address
number and the command on the remote control.
In the standard mode
it depends on the IR-code received which
action is taken.
Toggle mode
In toggle mode (one button mode) the user can send two
commands (ON or OFF) with one button (address number).
Which command is transmitted, depends on the present state
of the controlled object (ON/OFF). Independent of how long a
button is pressed; only one command will be transmitted.
Additional dim- or bright-commands can be transmitted if
receiving Dim- or Bright signals.
Note: When controling dimmers is required we
recommend to leave the IRIX35 in the standard
mode.
!
33
Standard mode (= default setting)
Toggle mode
Single letter code receiving mode
The IRIX35 can only receive signals of a single letter code.
If the letter code of the IRIX35 is programmed to any letter code
("A" to "P") the interface will only receive and forward the
programmed letter code.
*) Determined by IRIX35 when pressing a number on the remote control.
Send
ON
Current state Result state
ON ON
OFF ON
OFF
ON OFF
OFF OFF
Send
ON/OFF*
Current state Result state
ON OFF
OFF ON
34
Programming of the IRIX35
Programming the letter code
Send setup command
(letter and number code) (2x)
Press button
3 - 6 s
(Only for toggle mode)
Press button
6 - 9 s
LED continuous ON
Shortly press program switch
or wait 60 s
Address learn mode
LED blinks slowly
(flashes 5 x every 2 seconds)
Automatic process
to determine:
1.
2.
Current state of modules
Reaction to group
commands
Proces can take
aproximately 3 minutes
Operation mode
LED OFF
1 2
35
Entering in the programming mode:
Figure 1.
Press the programming switch in with a pointed object.
36
Programming the IRIX35 (cont'd.)
Programming the lettercode
To program a letter code into the IRIX35 please follow the next
steps:
1. Activate the programming mode by keeping the programming
switch pressed for 3 seconds. The LED will now lit.
2. Send Setup command, a letter code and a number code,
through the power line by an X-10 compatible transmitter to
the IRIX35. (E.g. Marmitek Home Control Box or
Programming Unit (
PRU256
)). Letter code "A" to "P" may be
programmed inclusive an arbitrary number code. For example,
to program letter code B, send B01 twice. The LED will blink
twice after receipt of two identical setup commands
(Address) in the program mode.
CHOOSE ACTION RESULT
Address Setup Command LED flashes
A01…P16 2 x Address 2 x
Note: It is not possible to program the IRIX35 with
a remote control only. To program the IRIX35 with
the remote control an additional remote control
receiver is required to send the setup commands
over the power line to the IRIX35.
!
1
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marmitek IRIX35 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek IRIX35 in the language / languages: English, Dutch as an attachment in your email.

The manual is 0,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info