Manual Marmitek IR Control 11 XTRA (page 4 of 68) (English, German, Dutch, French, Italian, Spanish)

613326

Zoom out

Zoom in

1/68

4 © MARMITEK

3. HOW DOES IT WORK?

Locate your A/V equipment in a closed cupboard, TV cabinet or even in

another room. The IR receiver must be installed in view of your own remote

control. Stick the IR blaster LED wherever you want in the cabinet and

conceals the IR main module neatly. Point the remote control at the IR

receiver in order to send the appropriate command to the IR LEDs (via the

IR main module). These will then immediately pass this onto the A/V

equipment.

The IR Control 10/11 XTRA™ is made up of three main components;

(1) IR Receiver

The IR Receiver receives infrared commands from your remote control and

sends these onto the IR Module.

The IR Control 10 XTRA™- contains an surface mount IR Receiver

The IR Control 11 XTRA™- contains a panel mount IR Receiver

(2) IR Module

The IR Module receives infrared commands from the IR Receiver,

processes them and sends them onto all connected IR Extender Cables.

(3) IR extension cable with two emitter LEDs or one blaster LED

The IR extension cable receives the infrared commands from the IR Module

and converts them via the IR LEDs or IR blasters into infrared signals. The

IR emitter LEDs have a limited range and therefore they have to be stuck

accurately on the IR receiver window of the A/V device you want to operate.

An IR blaster LED radiates much more infrared light (even up to 2 meters)

so it easily can operate multiple devices and therefore placing can be less

accurate.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek IR Control 11 XTRA in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,74 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Marmitek IR Control 11 XTRA Manual

Product: