Manual Marmitek Invisible Control 6 (page 5 of 40) (English, German, Dutch, French, Italian, Spanish)

494242

Zoom out

Zoom in

1/40

Note! The sticky strip may lead to discolouration or leave glue residues on certain

surfaces.

4.2 LOCATING THE IR EXTENDER LED

Place the LEDs (2) from the IR extender cable precisely on the IR window (infrared

sensor) on the A/V equipment that you wish to operate.

• Ensure that the IR extender cable’s LEDs are stuck precisely on the A/V device’s

infrared sensor (this can be extremely accurate on some devices). The exact position

can easily be located by shining a torch on the front panel and looking for the IR

sensor window.

• All IR LEDs include self-adhesive film with which they are attached to your A/V

equipment.

• Test the position and the performance of the IR LEDs before you secure them to the

IR window on your A/V equipment.

• If you use just one or two of the three LEDs, you can leave the other IR LED unused.

Never remove it from the extender cable!

4.3 LOCATING THE IR MODULE

Mount the IR Module (3) at an accessible place behind or alongside your A/V

equipment, in the vicinity of an electrical socket.

• Be aware of the cable length of the IR LEDs and the IR receiver.

• Make sure that the connections remain accessible and that the ‘IR data’ light

remains visible so you can check it is working properly.

• Use the self-adhesive strip which is supplied to locate the IR receiver just about

anywhere you please.

ENGLISH

INVISIBLE CONTROL6

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek Invisible Control 6 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,37 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Marmitek Invisible Control 6 Manual

Product: