613331
5
Zoom out
Zoom in
Previous page
1/32
Next page
INVISIBLE CONTROL 2 5
ENGLISCH
5. FREQUENTLY ASKED QUESTIONS
x In a few cases, the Receiver may be disrupted by interference and cannot,
therefore, pick up the signals it receives. If this is the case the red light will
be continuously illuminated than the Receiver must be relocated. This
interference is caused by equipment in the vicinity such as dimmers,
energy-saving light bulbs, IR alarms and so on. Direct sunlight can also
disrupt the Receiver.
x Invisible Control does not work with remote controls which use High
Frequency signals (such as B&O).
x Please ensure that the LEDs of the IR extender cable are placed correctly
to the infrared sensor of the A/V device, this has to be done very precisely.
The exact position can be found easily by shining at it with a flashlight.
x Some IR windows from set-top and satellite boxes are very sensitive and
are easily disrupted. These devices then receive too much infrared light
and will either work badly or not work at all. Relocate the IR LED so that
less infrared light is received via the IR window.
Do you have other questions that have not been resolved by the above
information? Please go to www.marmitek.com
6. TECHNICAL DATA
Invisible Control 2™ module
Power: DC 12V 200mA adapter
IR LEDs connections: 2 x 3.5 mm jack plug (mono)
Frequency range: 30-60 KHz.
IR reception range: ± 8 metres.
IR reception angle: 60° (+30°/-30° from centre).
Dimensions: 90 x 75 x 30mm
IR Extension cable
Connection: 3.5mm jack plug
IR LEDs: 2x IR LED
Length of cable: 3 metres (from plug to division 2m, from
division to LED 1m).
Specifications may change without prior notice.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marmitek Invisible Control 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek Invisible Control 2 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info