489105

Marmitek Insisible Scart 300 Manual

5
Zoom out
Zoom in
Previous page
1/51
Next page
(Only use non-rechargeable (alkaline) batteries.)
3. Replace the battery flap.
Because of the wireless technology the IR receiver can be placed wherever you want. It is
however important that it is within view and range of the remote control of the A/V device
you want to control. Check different positions to check which one works best.
6. INSTALLING THE IR EXTENDER.
1.
Connect the IR extender included to the ‘IN’ [F] on the back of the transmitter
(image 2).
2. Remove the protective layer of one of the IR LEDs. Place this IR LED on the IR screen of
the A/V device you want to control. Do not yet attach it permanently. Before pushing it
on, check whether the IR LED is working. Aim your original remote control at the screen
on the front of the separate IR receiver and select some channels. If the A/V device does
not react, it might be because the IR LED is not in the correct place. With some devices
the IR LED needs to be attached to a specific spot.
The second and third IR LEDs can be used to control a second and third A/V device. If you are
not using these IR LEDs, don’t remove them!
7. INSTALLING THE INVISIBLE SCART 300™
TO YOUR PC.
The Invisible Scart 300™ should be connec-
ted to the ‘TV-out’ or ‘Video-out’ of your
PC. This connection can usually be found
on the graphics card. The signal you should
offer is a so-called ‘composite video signal’,
also called CVBS. .
The connection to your graphics card can
look as follows (see image 6):
• Yellow RCA connection.
If your PC has such a connection, you
can just plug the RCA/RCA cable into the
yellow connection of your transmitter.
• DIN plug (S-VIDEO).
If you have an S-VIDEO connection, you
cannot directly plug the transmitter into
your PC, but you need an adapter cable.
This cable will turn your S-VIDEO signal
into a composite video signal. The cable is
usually supplied when you buy a graphics
card (PC) with ‘TV-out’, but is also available
via your Marmitek dealer (Art. nr. 09388).
Sometimes the standard cable does not
connect to the PC. In that case you should
6 MARMITEK
Image 6
Graphics card
Sound card
Yellow
Red
White
WhiteYellow
RCA Yellow
Red
20129_20060817_UG_scart300 26-09-2006 11:02 Pagina 6
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Marmitek Insisible Scart 300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Marmitek Insisible Scart 300 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info